Filter
Top Products
OPERATION
79
Using Other Functions
MULTI-ROOM set up
After you have completed the necessary connections for MULTI-ROOM operation you need to set up the
receiver for such operation. Follow the instructions below. The page after this one explains how to use the
MULTI-ROOM function once it's been set up.
1 Set the slide switch to SETUP.
Also make sure that the TV is on and set to the receiver.
2 Press SYSTEM SETUP on the remote
control.
The REMOTE SETUP MENU appears on your TV screen. You
can escape from this screen at any time by pressing SYSTEM
SETUP again.
Multi-Room
Volume Level
[VARIABLE]
IR Receiver
[PIONEER]
[EXIT]
CAUTION : If the "FIXED"
position is chosen, the
volume will be loud.
3 Use the 5¥∞ buttons to select the MULTI-
ROOM set up mode and press ENTER.
4 Select the VOLUME LEVEL by using the
2¥3 buttons.
If you hook up a just a power amplifier in the sub room the
receiver will act as a pre-amp. In this case choose VARIABLE
for the VOLUME LEVEL setting. If you hook up a full integrated
amplifier in the sub room (such as another Pioneer VSX receiv-
er) choose FIXED for the VOLUME LEVEL setting.
5 Select the IR RECEIVER type with the 5¥∞
buttons and select the type by using the
2¥3 buttons.
If you have the Pioneer-made MR-100 select PIONEER. If you
have an IR RECEIVER from a different company, select
OTHERS.
6 Move to the EXIT setting and press ENTER
to exit MULTI-ROOM set up and return to
the SYSTEM SETUP MENU operations.
You can leave the MULTI ROOM set up mode any time by
pressing the SYSTEM SETUP button.
• When you're done setting up, remember to set the slide
switch back to USE.
memo
Some IR RECEIVERS may not work
with this system, check with a Pioneer
representative to be sure.
CAUTION!
If the MULTI ROOM is set to FIXED
the volume on the main unit will be
set to maximum. Thus, when output,
it will be extremely loud. Please set
the master volume controls of the
integrated amplifier in the sub room
very low at first and experiment to find
a suitable volume.
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT
DSP
LIGHT
MUTE
TV
VOLUME
MD/
TAPE1
TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX
DIRECT ACCESS
CHANNEL
STATION
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
MIDNIGHT
MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/
CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
123
456
789
0
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
++
––
+
–
2,6
3,4
5,6
1
ADVANCED
DISC
EXIT
+10
GUIDE
ENTER
DTV ON/OFF DTV MENU
TUNING
/DTS