Filter
Top Products
38
1 Select BASS PEAK LEVEL (if continuing
from CROSSOVER NETWORK it will already
be selected).
See “Setting Up for Surround Sound“
on page 29 if you are
unsure how to do this.
Press the ENTER button.
Bass Peak Level Manager
[Setting Start ]
[Setting Cancel]
[EXIT]
2 Output the test tone for the LFE channel
and specify the peak level.
1 If your subwoofer has a volume control, set it to the middle
position before proceeding.
2 Select SETTING START.
3 Press the ENTER button.
Bass Peak Manager
[– 50]
[Setting OK ]
Bass Peak Level
[EXIT]
MASTER VOLUME rotates to MIN (---dB). Then the test tone
is output to the subwoofer or front or surround speakers.
4 Use the 2 or 3 button arrows to gradually increase the level
of the LFE channel until the test tone begins to distort. Then
go back and leave the level setting at a point just before
that. Press the ENTER button and the receiver will
remember this bass output level.
To exit before outputting the TEST TONE select EXIT and press
the ENTER button.
To exit while outputting the TEST TONE press the ENTER
button.
3 Select EXIT and press the ENTER button to
return to the SYSTEM SETUP MENU.
This completes the speaker setup.
Bass Peak Level
The LFE (Low Frequency Effect) channel in Dolby Digital or DTS program sources can produce heavy ultra-low
bass tones that may exceed the capabilities of your speaker system. The following steps show you how to set a
maximum output level for the LFE channel. If continuing from Crossover Network go to step 1. If starting fresh,
complete steps 1-3 in "Setting Up for Surround Sound" (p.29) first.
If you select SETTING CANCEL
no settings are input to the
receiver but the screen remains
on the TV. To escape the screen
you must Select EXIT and press
the ENTER button.
memo
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT
DSP
LIGHT
MUTE
TV
VOLUME
MD/
TAPE1
TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX
DIRECT ACCESS
CHANNEL
STATION
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
ADVANCED
MIDNIGHT
MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/
CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
123
456
789
0
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
++
––
+
–
1-3
ADVANCED
DISC
EXIT
+10
GUIDE
ENTER
DTV ON/OFF DTV MENU
TUNING
/
DTS
STANDBY/ON
DSP
MODE
MULTI-ROOM
&SOURCE
INPUT
SELECTOR
MASTER
VOLUME
SIGNAL SELECT
ADVANCEDSTANDARD
CONTROL
STANDBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
STEREO/
DIRECT
PHONES
S-VIDEO VIDEO
MULTI CH
INPUT
FL
DIMMER
TAPE 2
MONITOR
TONE
CHANNEL
SELECT
LOUDNESS
DIGITAL
NR
CLASS BAND
TUNER CONTROL
MEMORYMPX
VIDEO
SELCT
SPEAKERS
-
TUNING +
-
STATION +
-
TREBLE +
-
BASS +
L AUDIO R
VIDEO INPUT
Digital Signal Processor
VSX-D909S
/DTS
DOWN UP
MASTER VOLUME
Initial Set Up