Filter
Top Products
OPERATION
73
System Off
The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and turn off with
the push of only one button on the remote control (this feature will only work with components that have a
standby mode). For example, you can program the unit to stop your DVD, turn off your TV, turn off your DVD
player and turn off the receiver itself. You don't need to program in other the power for PIONEER components,
they will go off automatically in this mode. The receiver itself will go off automatically as well.
The steps below show you how to program a string of up to 5 different SYSTEM OFF operations based on eight
possible components.
Be sure to recall or teach the remote control commands for each component before attempting
MULTI OPERATIONS (see “Setting Up the Remote Control to Control Other Components,“ page
58-
61).
1 Set the remote control slide switch to
SETUP.
Also make sure that your TV is on and set to the receiver.
2 Press the REMOTE SETUP (INPUT ATT)
button and
3
at the same time to select
the MULTI OPERATION SETUP mode.
The REMOTE SETUP menu appears on your TV screen. The
MULTI CONTROL and the SYSTEM OFF buttons start to blink.
To cancel MULTI OPERATION SETUP mode, press REMOTE
SETUP.
3 Press the SYSTEM OFF button.
The SYSTEM OFF button will blink.
4 Press the MULTI CONTROL button for the
component whose operation you want to
start SYSTEM OFF with (for example, TV
CONT button).
The selected button will light steadily.
5 Press the operation, for example TV
(POWER), you want to input.
6 Repeat steps 3 and 4 to program a sequence
of up to five stop or power off commands
you want to input.
You can repeat this process for up to five
commands.
For example : you could enter the following two operations
using the proceeding steps 3 and 4.
1 Press TV CONT button & TV
(POWER) to turn off your TV
(as explained above).
2 Press DVD/LD then (POWER) to turn off your DVD player
(if it is not a PIONEER product).
When you employ SYSTEM OFF (see below), these two tasks
will be performed in the same order.
• To exit SYSTEM OFF SETUP mode, press REMOTE SETUP.
• When you're done setting up, remember to set the slide
switch back to USE.
memo
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT
DSP
LIGHT
MUTE
TV
VOLUME
MD/
TAPE1
TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX
DIRECT ACCESS
CHANNEL
STATION
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
MIDNIGHT
MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/
CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
123
456
789
0
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
++
––
+
–
1
3
4
6-
1
2
6-
2
2
5
ADVANCED
DISC
EXIT
+10
GUIDE
ENTER
DTV ON/OFF DTV MENU
TUNING
/DTS
Using Other Functions