Filter
Top Products
OPERATION
69
Recording from Audio Components
The following explanations show you how to record an analog or digital audio signal. Note that your analog
components cannot record a player that is only connected digitally (and vice-versa). If you want to record from a
digital component to an analog one (for example, a tape deck), or vice-versa, the digital component it must be
connected via analog jacks and you need to set the SIGNAL SELECT switch to ANALOG. To make exact digital
copies (of digital sources like CDs) both the source component and the recorder must be connected with digital
connections. See p.12 for more on analog audio connections and p.13 for digital audio connections.
The receiver's volume, channel level, balance, TONE, DIGITAL NR, MIDNIGHT, LOUDNESS and surround
effects have no effect on the recorded signal and the MULTI CH IN cannot be recorded.
In some cases, digital recordings have copy guard protections and making a digital copy is not possible.
In this case you can only copy them in an analog manner.
1 Select the source component. Set SIGNAL
SELECT according to the source
component's signal (ANALOG or DIGITAL).
Press the SIGNAL SELECT button on the remote control (or
use the button on the front panel) and choose ANALOG.
2 Start recording with a recorder.
3 Playback the source to be recorded.
Record monitor (TAPE 2 MONITOR)
If you connect a cassette deck with a record monitor function to the
TAPE 2 MONITOR jacks, you can listen to the sound of an analog
recording as it is being recorded.
Press TAPE 2 MONITOR to switch between the sound of the
recording (TAPE 2 indicator on) and the sound of the source
component (TAPE 2 indicator off).
memo
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT
DSP
LIGHT
MUTE
TV
VOLUME
MD/
TAPE1
TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX
DIRECT ACCESS
CHANNEL
STATION
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
MIDNIGHT
MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/
CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
123
456
789
0
Î
¶
873
1¡4¢
+
-
+
-
+
-
MULTI CONTROL
++
––
+
–
1
1
ADVANCED
DISC
EXIT
+10
GUIDE
ENTER
DTV ON/OFF DTV MENU
TUNING
/DTS
STANDBY/ON
DSP
MODE
MULTI-ROOM
&SOURCE
INPUT
SELECTOR
MASTER
VOLUME
SIGNAL SELECT
CONTROL
STANDBY
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
Digital Signal Processor
STEREO/
DIRECT
ADVANCEDSTANDARD
/DTS
DOWN UP
VSX-D909S
PHONES
S-VIDEO VIDEO
MULTI CH
INPUT
FL
DIMMER
TAPE 2
MONITOR
TONE
CHANNEL
SELECT
LOUDNESS
DIGITAL
NR
CLASS BAND
TUNER CONTROL
MEMORYMPX
VIDEO
SELCT
SPEAKERS
-
TUNING +
-
STATION +
-
TREBLE +
-
BASS +
L AUDIO R
VIDEO INPUT
TAPE 2 MONITOR
Using Other Functions