Filter
Top Products
Using the tuner
08
54
En
2 Press T.EDIT (TUNER EDIT).
The display shows
ST. MEMORY
, then a
blinking memory class.
3 Press CLASS to select one of the three
classes then press ST +/– (STATION +/–) to
select the station preset you want.
You can also use the the
MULTI JOG
dial
(front panel) to select a station preset.
4 Press ENTER.
After pressing
ENTER
, the preset class and
number stop blinking and the receiver stores
the station.
Naming station presets
For easier identification, you can name your
station presets.
1 Choose the station preset you want to
name.
See
Listening to station presets
below for how
to do this.
2 Press T.EDIT (TUNER EDIT).
The display shows
ST. NAME
, then a blinking
cursor at the first character position.
3 Input the name you want.
Names can be up to four characters long.
• Use the
MULTI JOG
dial (front panel) or
the
ST +/–
buttons (remote) to select
characters.
• Press
ENTER
to confirm a character. If no
character is input, a space is input.
• The name is stored when
ENTER
is
pressed after choosing the fourth
character.
• To erase a station name, simply repeat
steps 1-3 and input four spaces instead of
a name.
• Once you have named a station preset,
you can press
DISPLAY
when listening to
a station to switch the display between
the name and the frequency.
SP
A
STEREO
TUNED
A - 99.50
VSX_712_812_912.book 54 ページ ２００３年２月６日 木曜日 午前１０時５１分