Filter
Top Products
Setting up
07
49
En
English Italiano Français
Nederlands
EspañolDeutsch
Coaxial digital 1:
• Default settings:
DVD
• Use
or
to assign the coaxial
digital 1 input (DVD, TV, CD, CDR, VCR or
OFF).
Coaxial digital 2:
• Default setting:
CD
• Use
or
to assign the coaxial
digital 2 input (DVD, TV, CD, CDR, VCR or
OFF).
Optical digital 1:
• Default settings:
TV
• Use
or
to assign the optical digital
1 input (DVD, TV, CD, CDR, VCR or OFF).
Optical digital 2
(VSX-D812/D912 only)
• Default setting:
CDR
• Use
or
to assign the optical digital
2 input (DVD, TV, CD, CDR, VCR or OFF).
• You can’t assign two inputs to the same
function. For example, assigning input 1
to the default setting of input 2
automatically switches input 2 to
OFF
.
Manually calibrating your
listening area (MCACC)
You can use the Multi-Channel Acoustic Cali-
bration (MCACC) system to fine tune your
speaker levels and channel delay. These are
calibrated according to the distance from
your left front speaker to the listening posi-
tion. You will hear a series of test tones that
will allow you to set the speaker levels and
channel delay to your liking. The advantage of
doing this is that you can achieve an overall
balance defined by the front speakers (the
main speakers for home theater).
• You must complete the
Speaker setting
on
page 44 before using the MCACC setup.
• These test tones can be loud, so take care
that there is no one in the room who will
be startled by the noise.
MCACC
SETUP
ENTER
RECEIVER
VSX_712_812_912.book 49 ページ ２００３年２月６日 木曜日 午前１０時５１分