Filter
Top Products
1
1
Chapter
7
4
62
7
Controls and displays
Front panel
1
INPUT SELECTOR
dial
Selects an input source (page 25).
2
SPEAKERS
See Switching the speaker terminal on page 15.
The Speaker System setting may or may not be displayed,
depending on the input source you have selected.
3
MCACC indicator
Lights when Acoustic Calibration EQ (page 36) is on (Acoustic
Calibration EQ is automatically set to on after the Auto
MCACC setup (page 23
)).
4
ZONE controls (VSX-1023 only)
If you’ve made MULTI-ZONE connections (see Making MULTI-
ZONE connections on page 54) use these controls to control
the sub zone from the main zone (see Using the MULTI-ZONE
controls on page 54).
5
Character display
See Display on page 8.
6
Tuner control buttons
BAND
– Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 33
).
TUNER EDIT
– Use with
TUNE
/
,
PRESET
/
and
ENTER
to memorize and name stations for recall
(page 33
).
TUNE
/
– Used to find radio frequencies (page 33).
PRESET
/
– Use to select preset radio stations
(page 33
).
7
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (page 17
).
8
iPod iPhone iPad indicator
Lights when an iPod/iPhone/iPad is connected and
iPod/USB
input is selected (page 27
).
9
Remote sensor
Receives the signals from the remote control (see Operating
range of remote control on page 10).
10
MASTER VOLUME
dial
11
STANDBY/ON
12
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode (S.R AIR mode can be also selected with
ADAPTER input).
13
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (page 23
).
14
Listening mode buttons
AUTO SURROUND/STREAM DIRECT
– Switches between
Auto surround mode (page 34
) and Stream Direct
playback (page 35
).
ALC/STANDARD SURR
(VSX-1023 only) – Press for
standard decoding and to switch between the modes of
2 Pro Logic II, 2 Pro Logic IIx, 2 Pro Logic IIz and
NEO:6, and the Auto level control stereo mode (page 34
).
ALC/STANDARD SURR
(VSX-823 only) – Press for
standard decoding and to switch between the modes of
2 Pro Logic II and NEO:6, and the Auto level control
stereo mode (page 34
).
56
7
11
12 1514 17 1813
321 8 1049
16
19 20 21 23 24 21
27 28 29 30 30 3231
25
26
22
VSX-1023
VSX-1023_823_UCSMXCN_En.book 7 ページ ２０１２年１２月１８日 火曜日 午前１１時７分