Pioneer VSX-823-K Stereo Receiver User Manual


 
Playback with NETWORK features
6
6
44
4
62
7
1
Select ‘Firmware Update’ from the Network Setup
menu.
The receiver checks whether the USB memory device
inserted into the USB port on the receiver’s front panel
contains updatable firmware.
2
To update, select ‘Start’.
3
When ‘Updating in progress, don’t unplug!’ is
displayed, select ‘Start’.
If ‘File Not Found’ is displayed, try the following:
-
No update file was found on the USB memory
device. Store the file in the USB memory device’s
root directory.
-
Try disconnecting then reconnecting the USB device
or storing the update file again. If the error still
occurs, try using a different USB memory device.
4
The firmware update will start. Please wait.
The OSD display will turn off during update and the words
UPDATE’ will flash on the front panel.
5
If ‘COMPLETE’ is displayed, updating is completed.
The screen will return automatically to the play screen.
If ‘FAIL’ is displayed on the front panel display,
updating has failed. Try the following:
-
Turn the receiver’s power off, then turn it back on
and try updating the firmware again.
-
Try disconnecting then reconnecting the USB device
or storing the update file again. If the error still
occurs, try using a different USB memory device.
Network setting using Safari browser
1
Launch Safari on your computer.
2
Press Bookmark icon. Click Bonjour list (a), and then
select this receiver’s name (Friendly Name) (b) in
Bookmark.
If Bonjour list is not displayed, access the IP address
“http://(the receiver's IP address)” from Safari.
3
Click IP, Proxy Setting.
4
Setup the network settings manually and then press
Apply.
Note
This setting for the network has been confirmed for Mac OS
X 10.7 and Safari 5.1.
Friendly Name setting using Safari browser
1
Launch Safari on your computer.
2
Press Bookmark icon. Click Bonjour list (a), and then
select this receiver’s name (Friendly Name) (b) in
Bookmark.
3
Click Friendly Name.
4
Enter friendly name and then press Apply.
Note
This setting for the network has been confirmed for Mac OS
X 10.7 and Safari 5.1.
Firmware update using Safari browser
1
Launch Safari on your computer.
2
Press Bookmark icon. Click Bonjour list (a), and then
select this receiver’s name (Friendly Name) (b) in
Bookmark.
a
b
VSX-1023_823_UCSMXCN_En.book 44 ページ 2012年12月18日 火曜日 午前11時7分