Filter
Top Products
Listening to your system
05
29
En
English
Français
Deutsch
Nederlands
Italiano
Español
a.
You can change the MIDNIGHT/LOUDNESS options at any time by using
MIDNIGHT
button.
b.
The tone controls are only available when Stereo, Auto level control stereo mode or Front Stage Surround
Advance mode are selected (except when
STEREO
is selected using
AUTOSURR.
).
c.
Only available with 2-channel sources in Dolby Pro Logic II Music mode.
d.
This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
e.
You can change the Dialog Enhancement options at any time by using
DIALOG
button.
DUAL MONO
d
Specifies how dual mono encoded Dolby Digital
soundtracks should be played.
ch1
–
Channel 1 is heard only
ch2
–
Channel 2 is heard only
Lch1.Rch2
–
Both channels heard
from front speakers
DRC
(Dynamic Range
Control)
Adjusts the level of dynamic range for movie soundtracks
optimized for Dolby Digital and DTS (you may need to use
this feature when listening to surround sound at low
volumes).
OFF
MAX
MID
Dialog Enhancement
e
Localizes dialog in the center channel to make it stand out
from other background sounds in a TV or movie
soundtrack.
OFF
ON
LFE ATT
(LFE Attenuate)
Some Dolby Digital and DTS audio sources include ultra-
low bass tones. Set the LFE attenuator as necessary to
prevent the ultra-low bass tones from distorting the sound
from the speakers.
The LFE is not limited when set to 0 dB, which is the
recommended value. When set to –10 dB, the LFE is
limited by the respective degree. When OFF is selected, no
sound is output from the LFE channel.
LFEATT 0
(0 dB)
LFEATT 10 (–10 dB)/
LFEATT ** (OFF)
Setting
What it does Option(s)
VSX_518_KU.book 29 ページ ２００８年５月１５日 木曜日 午後６時３１分