Filter
Top Products
Controls and displays
04
19
En
English
Français
Deutsch
Nederlands
Italiano
Español
2
Lights to indicate decoding of a DTS
multichannel signal.
3
2
DIGITAL
Lights to indicate decoding of a Dolby Digital
multichannel signal.
4
2
PRO LOGIC II
Lights to indicate Pro Logic II decoding (see
Listening in surround sound
on page 24 for
more on this).
5 VIR.SB
Lights during Virtual surround back
processing (page 27).
6
DIRECT
Lights when source Stream Direct playback is in
use. Direct playback bypasses the tone controls
for the most accurate reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is
switched on (see
Auto playback
on page 24).
8
ATT
Lights when
ANALOG ATT
is used to attenuate
(reduce) the level of the analog input signal
(page 22)
.
9 SLEEP
Lights when the receiver is in sleep mode
(page 22).
10
Tuner
indicators
/
MONO
Lights when the mono mode is set using
the
MPX
button.
/
STEREO
Lights when a stereo FM broadcast is being
received in auto stereo mode.
/
TUNED
Lights when a broadcast is being received.
11 Speaker indicator
Shows if the speaker system is on or not.
SP
A
means the speakers are switched on.
SP
means the headphones are connected.
12 Character display
13
ADV.SURR.
(Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
14 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro
signal.
15
MIDNIGHT
Lights during Midnight listening
(page 28).
16 D.E.
Lights when Dialog Enhancement is switched
on (page 29).
17
LOUDNESS
Lights during Loudness listening
(page 28).
18 Master volume level
VSX_518_KU.book 19 ページ ２００８年５月１５日 木曜日 午後６時３１分