Filter
Top Products
5 minute guide
02
9
En
English
Français
Deutsch
Nederlands
Italiano
Español
There are several other sound options you can
select. See
Listening to your system
on page 31
for more on this.
1
See also
The System Setup
menu
on page 39 for more setup options.
Using the Quick Setup
VSX-517 model only
You can use the Quick Setup to get your
system up and running with just a few button
presses. The receiver automatically makes the
necessary settings after you have selected your
speaker setup, room size and listening
position.
If you want to make more specific settings,
refer to
The System Setup menu
on page 39.
Use the front panel controls for the steps
below.
1 If the receiver is off, press
STANDBY/ON
to turn the power on.
2 Press
QUICK SETUP
.
3 Use the
MULTI JOG
dial to choose your
subwoofer setting.
Select
YES
or
NO
, depending on whether
you’ve connected a subwoofer.
4 Press
ENTER
.
5 Use the
MULTI JOG
dial to choose your
speaker setup.
If you selected
YES
for the subwoofer setting in
step 3, the following choices are available:
2.1ch – 3.1ch – 4.1ch – 5.1ch
If you selected
NO
for the subwoofer setting in
step 3, the following choices are available:
2.0ch – 3.0ch – 4.0ch – 5.0ch
• Check the table below to find the speaker
setup that corresponds with your system.
6 Press
ENTER
.
7 Use the
MULTI JOG
dial to choose your
room size.
Depending on the distance of your speakers
from the listening position, choose between
small, medium, or large (
S
,
M
or
L
),
M
being
an average-sized room.
8 Press ENTER.
9 Use the
MULTI JOG
dial to choose your
listening position.
You can cycle between the following choices:
•
FWD
– If you are nearer to the front
speakers than the surround speakers
•
MID
– If you are equal distance from the
front and surround speakers
•
BACK
– If you are nearer to the surround
speakers than the front speakers
10 Press
ENTER
to confirm your setup.
The display shows the speaker setup, room size
and listening position that you have selected.
Note
1 Depending on your DVD player or source discs, you may only get digital 2 channel stereo and analog sound. In this case, the
listening mode must be set to
STANDARD
(it should already be set – see
Listening in surround sound
on page 31 if you need to
do this) if you want multichannel surround sound.
STANDBY
/
ON
PHONES
DVD/ LD
DVD 5.1 TV/SAT
DVR/ VCR
MIDNIGHT/
LOUDNESS
VSB
MODE
SOUND
RETRIEVER
DIALOGUE
ENHANCEMENT
PHASE
CONTROL
AUTO SURR/
DIRECT
QUICK
SETUP
SETUP RETURN
TONE
TUNER
EDIT
SIGNAL
SELECT
DIMMER
MULTI JOG
PHASE
CONTROL
UPDOWN
MULTI JOG
MASTER
VOLUME
ENTER
VSX-517
STANDARD
ADVANCED
SURROUND
STEREO/
F.S. SURR
LISTENING
MODE
TUNING
STATION
VSX517_817.fm 9ページ ２００７年２月２２日 木曜日 午後８時１１分