Filter
Top Products
Using the tuner
07
35
En
4 Press ENTER to search for the program type.
The system starts searching through the station presets
for a match. When it finds one, the search stops and the
station plays for five seconds.
5 If you want to keep listening to the station, press
ENTER within the 5 seconds.
If you don’t press
ENTER
, searching resumes.
If
NO PTY
is displayed it means the tuner couldn’t find
that program type at the time of the search.
1
Displaying RDS information
Use the
DISP
button to display the different types of RDS
information available.
2
• Press
DISP
for RDS information.
Each press changes the display as follows:
• Radio Text (
RT
) – Messages sent by the radio station.
For example, a talk radio station may provide a phone
number as RT.
• Program Service Name (
PS
) – The name of the radio
station.
• Program Type (
PTY
) – This indicates the kind of
program currently being broadcast.
• Current tuner frequency (
FREQ
)
Using EON
When EON (Enhanced Other Network information) is
turned on, the receiver jumps to an EON-linked
broadcast when it begins, even if a receiver function
other than the tuner is being used. It can’t be used in
areas that EON information isn’t transmitted and when
FM broadcast stations don’t transmit PTY data. When the
broadcast ends, the tuner returns to the original
frequency or function.
1 Press the
BAND
button to select the FM band.
3
2 Press EON to select one of the possible modes.
Press repeatedly to switch between:
•
EON TA
(Traffic Announcement) – Sets the tuner to
pick up traffic information when it is broadcast.
•
EON NEWS
– Sets the tuner to pick up news when it
is broadcast.
•
OFF
– Switches off the EON feature.
When set to
TA
or
NEWS
, the
EON
indicator in the
display lights (it flashes when receiving an EON
broadcast).
4
The indicator in the display lights when
the current station carries the EON service.
5
Note
1 RDS searches station presets only. If no stations have been preset, or if the program type could not be found among the station presets
NO PTY
is dis-
played.
FINISH
means the search is complete.
2• If any noise is picked up while displaying the RT scroll, some characters may be displayed incorrectly.
• If you see
NO RADIO TEXT DATA
in the RT display, it means no RT data is sent from the broadcast station. The display will automatically switch to
the PS data display (if no PS data, the frequency is displayed).
• In the PTY display,
NO DATA
or
NONE
may be shown. In this case, the PS display is shown after a few seconds.
3 EON is only possible in the FM band.
4 You can’t search for traffic announcements and news at the same time.
5• You cannot operate the
TUNER EDIT
and
PTY SEARCH
buttons while the
EON
indicator in the display is lit.
• If you want to change to a function other than the tuner when the
EON
indicator is flashing, press
EON MODE
to turn EON off.
ENTER
TUNE
TUNE
ST ST
TOP MENU
PTY SEARCH
T.EDIT
MENU
RETURN
GUIDE
BAND
SETUP
MPX
A
B
CDE
EON
AUDI O
DISP
SUBTITLE
REC
MUTE
REC STOP JUKEBOX
HDD
CH
CH
DVD
VSX-1016_HY.book.fm 35 ページ ２００６年２月２４日 金曜日 午前１１時５３分