Filter
Top Products
Using the timer
08
56
En
Chapter 8
Using the timer
Setting the wake-up timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
• The clock must be set to the correct time
for the wake-up timer to work properly
(see
Setting the clock
on page 19).
1 Select the source you want played.
For example, press
TUNER
to select the radio
as your source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you’ve selected a CD, make sure that it’s
stopped.
3 Set the volume.
4 Press TIMER/CLOCK twice to reach the
timer menu.
5 Use the
/
(cursor left/right)
buttons to select ‘Wake-Up?’ then press
ENTER.
6 Use the
/
(cursor left/right)
buttons to select ‘TimerEdit’ then press
ENTER.
7 Set the switch-on time.
Use the
/
(cursor up/down) buttons to set
the hour, then press
ENTER
. Set the minute in
the same way, pressing
ENTER
when you’re
done.
8 Set the switch-off time.
Use the
/
(cursor up/down) buttons to set
the hour, then press
ENTER
. Set the minute in
the same way, pressing
ENTER
when you’re
done.
After pressing
ENTER
this last time, the wake-
up indicator lights, and the switch-on, switch-
off times, the function (
DVD/CD
, etc.) and
volume are confirmed in the display.
9 Switch the system into standby mode.
The wake-up timer will not work if the system
is left on!
STANDBY/ON
CD FM/AM
OPEN CLOSEDISPLAY
DVD TUNER TV LINE
L1/L2
DVD MENU
RETURN
SOUND
TV CONTROL
CH VOL
INPUT
MUTE
TEST TONE
123
ZOOM
TOP MENU
CH LEVEL
DIMMER
REPEAT
AUDIO ANGLE
RANDOM
SUBTITLE
PROGRAM
456
78
0
FOLDER–
ROOM SETUP
CLR
ENTER
FOLDER+
MENU
HOME
SETUP
SYSTEM
MIDNIGHT
QUIET/
CLOCK
TIMER/
BASS MODE DIALOGUE VIRTUAL SB
AUTO SURROUND ADVANCED
ST+
TUNE+
TUNE–
ST–
ENTER
STANDBY/ON
CD FM/AM
L1/L2
CLOCK
TIMER/
DVD TUNER TV LINE
ST+
TUNE+
TUNE–
ST–
ENTER
MASTER
VOLUME
9
MAIN SUB
PDP
HTS.book 56 ページ ２００３年４月２８日 月曜日 午後８時０分