Pioneer N30 Speaker System User Manual


 
Connections02
8
En
Connecting using wireless LAN
Wireless connection to the network is possible through
a wireless LAN connection. Use the separately sold
wireless LAN converter (Pioneer Model No. AS-WL300)
for connection.
Note
Use only the furnished accessory connecting cable.
For instructions on setting the wireless LAN
converter, refer to the operating instructions for the
AS-WL300.
Plugging in
Important
Before making or changing the connections,
switch off the power and disconnect the power cord
from the AC outlet.
Caution
Do not use any power cord other than the one
supplied with this unit.
Do not use the supplied power cord for any purpose
other than that described below.
After you’ve finished making all connections, plug the
unit into an AC outlet.
1 Plug the supplied power cord into the
AC IN
socket on the back of the unit.
2 Plug the other end into a power outlet.
WAN
DC 5V WPS
Ethernet
DIGITAL OUT
OPTICAL COAXIAL OPTICAL COAXIAL
12
DIGITAL IN
DIGITAL IN
ADAPTER PORT
LAN (10/100) DC OUTPUT
for WIRELESS LAN
USB
(OUTPUT 5V
0.1A MAX)
(OUTPUT 5V
0.6A MAX)
Internet
Modem
Wireless LAN
Router
Wireless LAN converter (AS-WL300)
(commercially available)
AC IN
To AC outlet
Power cord
N-50-K_En.book 8 ページ 2011年9月7日 水曜日 午後5時4分