Pioneer HTZ181DVD Home Theater System User Manual


 
Controls and displays 03
15
En
English
FrançaisDeutsch
Nederlands
Italiano Español
SHIFT+ANGLE (page 30)
SHIFT+ZOOM (page 30)
4
TOP MENU
(page 19 and 30)
SHIFT+SETUP
(page 17, 20, 41, 43, 44, 45,
51, 52 and 57)
5
SHIFT+KARAOKE (page 33)
SHIFT+ECHO (page 33)
SHIFT+ / SHIFT+ (page 33)
Cursor buttons
ENTER
TUNE (page 20)
PRESET (page 20)
6
HOME MENU
7 Sound controls
AUTO
/
STEREO (page 22 and 23)
SURROUND (page 22 and 23)
SOUND (page 23 and 24)
MP3 EXP
/
V.ENH
(page 24)
8 Playback controls (page 19 and
25
)
9 TV CONTROL buttons
These control Pioneer flat screen TVs.
1
10
SHIFT
11
OPEN/CLOSE
(page 18, 32 and 53)
12 PLAYLIST buttons (page 27)
13 MIC VOL +/– (page 33)
14
MENU
(page 19, 26 and 30)
15
RETURN
16 Tuner controls
CLASS (page 21)
SHIFT+T.EDIT (page 20)
17 MUTE
18 VOLUME +/– (page 18)
Putting the batteries in the remote
control
1 Open the battery compartment cover
on the back of the remote control.
2 Insert two AA/R6 batteries into the
battery compartment following the
indications (, ) inside the compartment.
3 Close the cover.
CAUTION
Incorrect use of batteries can result in hazards
such as leakage and bursting. Please observe
the following:
Always insert batteries into the battery
compartment correctly matching the
positive and negative polarities, as
shown by the display inside the
compartment.
Never mix new and used batteries.
Batteries of the same size may have
different voltages, depending on brand. Do
not mix different brands of batteries.
When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules
that apply in your country or area.
Note
1 Hold down the number button 1 for over three seconds with the CLEAR pressed. If the TV refuses to respond, hold down the
number button 2. After control is properly switched over, the power to the TV can be operated by directing the TV CONTROL
toward the TV and pressing it.
HTZ180_181_280_282DVD_En.book 15 ページ 2009年3月13日 金曜日 午後2時50分