Pioneer FH-P8900MD CD Player User Manual


 
23
Multi-CD Player
Display and indicators
FORM 1
FORM 2
qSource name
wDisc number
eTrack number
rDisc title
tPlay time
yTrack title
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
Basic operation
This product can control a multi-CD player,
which is sold separately.
1. Press (up or down) SOURCE to select the
multi-CD player.
Press (up or down) SOURCE until Multi-
CD appears.
2. Press (up or down) VOLUME to adjust the
volume.
3. Press 5 or to select a disc.
A disc number for which there is no disc will
be skipped.
You can use the buttons 1 6 (or 7 12)
to select a disc directly.
4. Press 2 or 3 to select a track.
Pressing 3 skips to the start of the next
track.
Pressing 2 once skips to the start of the cur-
rent track. Pressing again will skip to the
previous track.
If you press and hold 2 or 3, you can per-
form fast forward or reverse.
Note:
When the multi-CD player is performing the
preparatory operations, “Ready” is displayed.
If the multi-CD player cannot operate properly, an
error message such as “ERROR-14” is displayed.
Refer to the multi-CD player owner’s manual.
If there are no discs in the multi-CD player maga-
zine, “No disc” is displayed.
When you load a CD TEXT disc or switch from
another source to the built-in CD player when a CD
TEXT disc is loaded, disc and track titles are auto-
matically scrolled once in the display. When you
select a track, the track title is also automatically
scrolled once in the display. (The title of the track
you are currently listening to is not scrolled if you
return to the start of that track.)
Selecting a disc directly
You can use the buttons 1 6 (or 7 12) to
select a disc directly.
1. Press NEXT to display “1” – “6” (or “7” –
“12”).
Press NEXT until 1 6(or 7 12)
appears.
2. Press any of the buttons 1 – 6 (or 7 – 12)
to select a disc located at 1 to 6 (or 7 to
12).
Note:
You cannot display “7” – “12” when a 6-disc multi-
CD player is connected.
qw
yr
et
qw
rt
e