Filter
Top Products
Display and indicators
FORM 1
FORM 2
qBand
wLOC indicator
ePreset number
rFrequency
tStereo indicator
Basic operation
Reset the AM tuning step from 9 kHz (the facto-
ry preset step) to 10 kHz when using the tuner
in North, Central or South America. (Refer to
page 41.)
1. Press (up or down) SOURCE to select the
tuner.
Press (up or down) SOURCE until “Tuner”
appears.
2. Press (up or down) VOLUME to adjust the
volume.
3. Press BAND to select the desired band.
Press BAND repeatedly to switch between
the following bands:
FM-1 = FM-2 = FM-3 = AM
4. Press 2 or 3 to tune in to a station.
The frequencies move up or down step by
step.
• If you press and hold 2 or 3 for about one
second and release, you can perform seek
tuning. Seek tuning lets you skip broad-
casting stations until a broadcast strong
enough for good reception is found.
• If you press and hold 2 or 3, you can skip
broadcasting stations. Seek tuning starts
as soon as you release the button.
Note:
• The stereo indicator “” lights when a stereo sta-
tion is selected.
qwe
r
t
qwe
tr
12
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
Tuner