Specifications
General
Rated power source ...............14.4 V DC
(allowable voltage range:
12.0 14.4 V DC)
Grounding system ...................Negative type
Max. current consumption
..................................................... 10.0 A
Dimensions (W × H× D):
DIN
Chassis .....................178 × 50 × 159 mm
Nose ...........................188 × 58 × 29 mm
D
Chassis .....................178 × 50 × 164 mm
Nose ...........................170 × 45 × 24 mm
Weight ..........................................1.6 kg
Audio/DSP
Continuous power output is 22W per channel minimum
into 4 ohms, bothchannels driven 50 to 15,000Hz with
no more than 5% THD.
Maximum power output....... 50 W × 4
Load impedance ...................... 4 W (4 8 Wallowable)
Preout max output level/output impedance
..................................................... 6.5 V/100 W
Loudness contour ...................+10 dB (100 Hz), +6.5 dB
(10 kHz) (volume: 30 dB)
Equalizer (13-Band Graphic Equalizer):
Frequency ..........................50/80/125/200/315/500/800
Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization range ........±12 dB
Auto equalizer (just for standard mode):
(Front & rear & subwoofer 13 band graphic)
Frequency ..........................50/80/125/200/315/500/800
Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization range ........+6 12 dB
Network (standard mode):
HPF (Front/rear):
Frequency ................50/63/80/100/125/160/200
Hz
Slope .......................... 0 (Pass)/6/12 dB/oct
Gain ............................ 0 24 dB/Mute
Subwoofer:
Frequency ................50/63/80/100/125/160/200
Hz
Slope .......................... 6/12/18 dB/oct
Gain ............................ +6 24 dB/Mute
Phase ........................ Normal/Reverse
Network (3-way network mode):
High HPF:
Frequency ................1.6/2/2.5/3.15/4/5/6.3/8/10/
12.5/16 kHz
Slope .......................... 6/12/18/24 dB/oct
Gain ............................ 0 24 dB/Mute
Phase ........................ Normal/Reverse
Mid HPF/LPF:
Frequency (LPF) ...1.6/2/2.5/3.15/4/5/6.3/8/10/
12.5/16 kHz
Frequency (HPF)
................................. 31.5/40/50/63/80/100/125/
160/200 Hz
Slope .......................... 0 (Pass)/6/12/18/24 dB/
oct
Gain ............................ 0 24 dB/Mute
Phase ........................ Normal/Reverse
Low LPF:
Frequency ................31.5/40/50/63/80/100/125/
160/200 Hz
Slope .......................... 12/18/24/30/36 dB/oct
Gain ............................ +6 24 dB/Mute
Phase ........................ Normal/Reverse
CD player
System .......................................... Compact disc audio system
Usable discs ..............................Compact disc
Signal format:
Sampling frequency .....44.1 kHz
Number of quantization bits
........................................... 16; linear
Frequency characteristics ...5 20,000 Hz (±1dB)
Signal-to-noise ratio ............... 100 dB (1 kHz) (IEC-A net-
work)
Dynamic range .........................95 dB (1 kHz)
Number of channels .............. 2 (stereo)
MP3 decoding format ........... MPEG-1 & 2 AudioLayer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9 (2ch audio)
WAV signal format ..................Linear PCM & MS ADPCM
FM tuner
Frequency range ......................87.5 108.0 MHz
Usable sensitivity .....................8 dBf (0.7 µV/75 W, mono,
S/N: 30 dB)
50 dB quieting sensitivity..... 10 dBf (0.9 µV/75 W,mono)
Signal-to-noise ratio ............... 75 dB (IEC-A network)
Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65 dBf, 1 kHz,
mono)
Frequency response ............... 30 15,000 Hz (±3 dB)
Additional Information
En
72
Appendix