Filter
Top Products
Introduction of advanced
built-in CD player operation
1
2
1 Function name tag
Shows the function currently selected in
highlighted manner.
2 Function display
Shows the function status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL clockwise to switch be-
tween the functions in the following order:
PLAY MODE (repeat play)RANDOM (ran-
dom play)SCAN (scan play)PAUSE
(pause)SEARCH MODE (search method)
TAG READ (tag display)COMP/BMX
(compression and BMX)DISC TITLE (disc
title input)
# You can also switch between the functions in
the reverse order by turning MULTI-CONTROL
counterclockwise.
# To return to the playback display, press
BAND/ESC.
Notes
! When playing audio data (CD-DA), tag display
is not effective even if you turn TAG READ
(tag display) on. (Refer to page 28.)
! When playing a CD TEXT disc, you cannot
switch to DISC TITLE. The disc title will have
already been recorded on a CD TEXT disc.
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Use MULTI-CONTROL to select
PLAY MODE.
The function name tag PLAY MODE is high-
lighted.
2 Press MULTI-CONTROL to turn repeat
play on.
Repeat mode :ON appears in the display. The
track currently playing will play to the end and
then repeat.
# To turn repeat play off, press
MULTI-CONTROL again.
Note
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Built-in CD Player
En
20
Section
05