Filter
Top Products
Disconnecting a cellular phone
1 Use MULTI-CONTROL to select
DISCONNECT PHONE in the function menu.
Device name of the connected phone appears
in the display.
2 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After disconnection is completed,
DISCONNECTED is displayed.
Registering a connected
cellular phone
1 Use MULTI-CONTROL to select
SET PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
# You can also perform the sameoperations by
pushing MULTI-CONTROL up or down.
# As you selecteach assignment, you can see
whether or nota phone is already registered. If
the assignment is empty, NO DATA is displayed.
If the assignment is already taken, the device
name appears. To replace an assignment with a
new phone, first delete the current assignment.
For more detailed instructions, see Deletinga re-
gistered phone on this page.
4 Press MULTI-CONTROL to register the
currently connected phone.
When registration is completed,
REG COMPLETED is displayed.
# If the registration fails, REG ERROR is dis-
played. In this case, return to step 1 andtry
again.
Deleting a registered phone
1 Use MULTI-CONTROL to select
DELETE PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
# You can also perform the sameoperations by
pushing MULTI-CONTROL up or down.
# If the assignment is empty, NO DATA is dis-
played and operation is not possible.
4 Press MULTI-CONTROL to show the con-
firmation display.
5 Turn MULTI-CONTROL to select
DELETE OK?: YES.
The phone being deleted is now on standby.
# To cancel, selectDELETE OK?: NO.
6 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted, DELETED is dis-
played.
Connecting to a registered
cellular phone
Connecting to a registered phone
manually
1 Use MULTI-CONTROL to select
CONNECT PHONE in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select a regis-
tration assignment.
P1 (user phone 1)—P2 (user phone 2)—P3
(user phone 3)—G1 (guest phone 1)—G2
(guest phone 2)
Available accessories
En
42
Section
06