Filter
Top Products
3 Turn MULTI-CONTROL to select the
function.
CONNECTION OPEN (connection open)—
DISCONNECTAUDIO (disconnect audio)—
PLAY (Play)—STOP (Stop)—PAUSE (pause)—
DEVICE INFO (device information)
PAUSE is the same as that of the built-in CD
player. (Refer to Pausing playback on page 19.)
# You can also perform the sameoperations by
pushing MULTI-CONTROL up or down.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the previous display, press BACK.
! To return to the main menu, press andhold
BACK.
! To return to the ordinary display, press
BAND/ESC.
! If a Bluetooth audio player is notconnected to
this unit yet,CONNECTION OPENand
DEVICE INFO appear in the function menu
and other functions are not available.
! If a Bluetooth audio player is connectedvia
higher level, CONNECTION OPEN does not
appear in thefunction menu and the other
functions are available.
! If a Bluetooth audio player is connectedvia
lower level, only DISCONNECTAUDIO and
DEVICE INFO appear in the function menu.
! If you do not operate functions other than
CONNECTION OPEN and
DISCONNECTAUDIO within about 30 sec-
onds, the display is automatically returned to
the ordinary display.
Connecting a Bluetooth audio
player
1 Use MULTI-CONTROL to select
CONNECTION OPEN in the function menu.
2 Press MULTI-CONTROL to open the con-
nection.
ALWAYS WAITING is displayed. This unit is
now on standby for connection from Bluetooth
audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
Note
Before you canuse audio players you may need
to enter the PIN code into this unit. If your player
requires a PIN code to establish a connection,
look for thecode on the player or in its accompa-
nying documentation. Refer to EnteringPIN code
for Bluetooth wireless connection on page 32.
Playing songs on Bluetooth
audio player
1 Use MULTI-CONTROL to select PLAY in
the function menu.
2 Press MULTI-CONTROL to start play-
back.
Stopping playback
1 Use MULTI-CONTROL to select STOP in
the function menu.
2 Press MULTI-CONTROL to stop the play-
back.
Disconnecting a Bluetooth
audio player
1 Use MULTI-CONTROL to select
DISCONNECTAUDIO in the function menu.
2 Press MULTI-CONTROL to disconnect
the Bluetooth audio player.
DISCONNECTED is displayed. The Bluetooth
audio player is now diconnected from this
unit.
Available accessories
En
38
Section
06