Filter
Top Products
Making a phone call
Voice recognition
1 Press BAND/ESC and hold until
VOICE DIAL appears in the display.
VOICE DIAL appears in the display. When
VOICE DIAL ON is displayed, voice recogni-
tion function is now ready.
# If your cellular phone does not feature voice
recognition function, NO VOICE DIAL appears in
the display and opearation is not available.
2 Pronounce the name of your contact.
Taking a phone call
Answering or rejecting an incoming call
% Answering an incoming call
When a call comes in, press
MULTI-CONTROL.
# You can also perform this operationby push-
ing MULTI-CONTROL up.
% End a call
Push MULTI-CONTROL down.
% Rejecting an incoming call
When a call comes in, push MULTI-CONTROL
down.
Notes
! If private modeis selectedon the cellular
phone, hands-free phoning maynot be per-
formed.
! The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Operating a call waiting
% Answering a call waiting
When a call comes in, press
MULTI-CONTROL.
# You can also perform this operationby push-
ing MULTI-CONTROL up.
% End all calls
Push MULTI-CONTROL down.
% Switch between callers on hold
Press MULTI-CONTROL.
# You can also perform this operationby push-
ing MULTI-CONTROL up.
% Rejecting a call waiting
Push MULTI-CONTROL down.
Notes
! Pushing MULTI-CONTROL downends all
calls including calls waiting on line.
! To end the call, both you and your caller need
to hang upthe phone.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
function.
SEARCH PHONE (search and connect)—
CONNECTION OPEN (connection open)—
DISCONNECT PHONE (disconnect phone)—
CONNECT PHONE (connect phone)—
SET PHONE (registering phone)—
DELETE PHONE (delete phone)—
PH BOOK TRANSFER (phone book transfer)—
CLEAR MEMORY (clear memory)—
NUMBER DIAL (call by entering number)—
REFUSE CALLS (automatic reject setting)—
AUTO ANSWER (automatic answer setting)—
RING TONE (ring tone select)—
AUTO CONNECT (automatic connection set-
ting)—ECHO CANCEL (echo cancel)—
DEVICE INFO (device information)
If not connected yet
The following functions cannot be operated.
Available accessories
En
40
Section
06