Filter
Top Products
! To return to the ordinary display, press
BAND/ESC.
! If you select another folder during repeat play,
the repeat play range changes to ALL.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat playrange
changes to FOLDER.
! When FOLDER is selected,it is not possible to
play back asubfolder of that folder.
! After file or folderscanning is finished, nor-
mal playback of the files begins again.
Playing songs on iPod
For details about the supported iPod, refer to
iPod
®
compatibility on page 6.
Basic Operations
% Fast forward or reverse
Push and hold MULTI-CONTROL left or right
for about one second and release.
% Select a track (chapter)
Push MULTI-CONTROL left or right.
Notes
! When using an iPod, iPod Dock Connectorto
USB Cable is required.
! Read the precautions foriPod on page 54.
! While iPod is connected to this unit, PIONEER
(or
(check mark)) is displayed on the iPod.
! If an errormessage such as ERROR-19 is dis-
played, refer to Error messages on page 50.
! When the ignition switch is set to ACC or ON,
the iPod’s battery is charged while the iPod is
connected to this unit.
! While the iPod is connected to this unit, the
iPod cannot be turnedon or off.
! Before connecting the dock connector of this
unit to theiPod, disconnect the headphones
from the iPod.
! The iPod is turned off about two minutes after
the ignition switch is set to OFF.
Browsing for a song
Operations to control an iPod with this unit is
designed to be as close to the iPod as possible
to make operation and song search easy.
! Depending on the number of files in the
iPod, there may be delay when displaying a
list.
! If the characters recorded on the iPod are
not compatible with this unit, those charac-
ters are not displayed.
1 Press LIST to switch to the top menu of
the list search.
Operating this unit
En
22
Section
02