Filter
Top Products
Specifications
General
Power source.............................14.4V DC (10.8 15.1 Val-
lowable)
Grounding system...................Negativetype
Max. currentconsumption
.....................................................10.0 A
Dimensions (W× H× D):
DIN
Chassis .....................178 × 50 × 157 mm
Nose...........................170 × 46 × 14 mm
D
Chassis .....................178 × 50 × 162 mm
Nose...........................170 × 46 × 14 mm
Weight ..........................................1.4 kg
Audio
Maximum poweroutput.......50 W × 4
Continuous poweroutput ...27W ×4 (DIN 45324,
+B=14.4 V)
Load impedance ......................4 W (4 8Wallowable)
Preoutmax outputlevel/output impedance
.....................................................2.2 V/1 kW
Equalizer (3-BandParametric Equalizer):
Low
Frequency ................40/80/100/160 Hz
Q Factor ....................0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................±12dB
Mid
Frequency ................200/500/1k/2k Hz
Q Factor ....................0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................±12dB
High
Frequency ................3.15k/8k/10k/12.5k Hz
Q Factor ....................0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................±12dB
Loudness contour
Low .......................................+3.5 dB (100 Hz), +3dB (10
kHz)
Mid .......................................+10 dB (100 Hz), +6.5 dB
(10 kHz)
High .....................................+11 dB (100 Hz), +11 dB
(10 kHz)
(volume: 30 dB)
CD player
System ..........................................Compact disc audiosystem
Usable discs ..............................Compact disc
Signal format:
Sampling frequency .....44.1kHz
Number ofquantization bits
...........................................16; linear
Frequency characteristics ...5 20,000Hz (±1dB)
Signal-to-noise ratio ...............94 dB (1 kHz) (IEC-A net-
work)
Dynamic range .........................92 dB (1 kHz)
Number ofchannels ..............2 (stereo)
FM tuner
Frequency range ......................87.5 108.0MHz
Usable sensitivity.....................8 dBf(0.7 µV/75 W, mono,
S/N: 30dB)
50 dBquietingsensitivity.....10 dBf (0.9 µV/75 W, mono)
Signal-to-noise ratio ...............75 dB (IEC-A network)
Distortion .....................................0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 %(at65 dBf,1 kHz,
mono)
Frequency response ...............30 15,000Hz (±3dB)
Stereo separation ....................45 dB (at 65 dBf, 1 kHz)
Selectivity ....................................80 dB (±200 kHz)
MW tuner
Frequency range ......................531 1,602kHz (9kHz)
Usable sensitivity.....................18 µV (S/N: 20 dB)
Signal-to-noise ratio ...............65 dB (IEC-A network)
LW tuner
Frequency range ......................153 281kHz
Usable sensitivity.....................30 µV (S/N: 20 dB)
Signal-to-noise ratio ...............65 dB (IEC-A network)
Note
Specifications and thedesign are subject to pos-
sible modifications withoutnotice due to im-
provements.
Additional Information
En
34
Appendix