Filter
Top Products
2 Press a to turn AF on.
Press a and AF:ON is displayed.
3 Press b to turn AF off.
Press b and AF:OFF is displayed.
Notes
! Only RDS stationsare tuned in during seek
tuning or BSMwhen AF is on.
! When you recalla preset station, the tuner
may update the presetstation with a newfre-
quency from thestations AF list. (This is only
available when usingpresets on the F1 or F2
bands.) No presetnumber appears on the dis-
play if the RDS datafor the station received
differs from thatfor the originally stored sta-
tion.
! Sound may be temporarily interrupted by an-
other program duringa AF frequency search.
! AF can be turnedon or off independently for
each FM band.
Using PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, PI SEEK is displayed and the output is
muted. The muting is discontinued after com-
pletion of the PI Seek, whether or not a differ-
ent station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
! The default setting for Auto PI Seek is off.
See Switching Auto PI Seek on page 29.
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
1 Press FUNCTION to select REG.
Press FUNCTION until REG appears in the dis-
play.
2 Press a to turn the regional function
on.
Press a and REG:ON is displayed.
3 Press b to turn the regional function
off.
Press b and REG:OFF is displayed.
Notes
! Regional programming and regionalnetworks
are organized differentlydepending on the
country (i.e., they may changeaccording to
the hour, state or broadcast area).
! The preset numbermay disappear on the dis-
play if the tunertunes in a regional station
which differs fromthe originally set station.
! The regional functioncan be turned on or off
independently for eachFM band.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross-references
TP stations).
RDS
En
12
Section
05