Filter
Top Products
Introduction of advanced
multi-CD player operation
1 RPT indicator
Shows when repeat range is selected to cur-
rent track.
2 Function display
Shows the function status.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)RDM (random play)
SCAN (scan play)ITS-P (ITS play)PAUSE
(pause)COMP (compression and DBE)
# To return to theplayback display, press BAND.
Note
If you do not operatethe function within about30
seconds, the displayis automatically returned to
the playback display.
Repeating play
There are three repeat play ranges for the
multi-CD player: MCD (multi-CD player re-
peat), TRK (one-track repeat) and DSC (disc re-
peat).
1 Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis-
play.
2 Press c or d to select the repeat range.
Press c or d until thedesired repeat range ap-
pears in the display.
! MCD Repeat all discs in the multi-CD
player
! TRK Repeat just thecurrent track
! DSC Repeat the currentdisc
Notes
! If you select otherdiscs during repeat play,
the repeat play rangechanges to MCD.
! If you perform track search or fast forward/re-
verse during TRK, the repeat playrange
changes to DSC.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range, MCD
and DSC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
3 Press a to turn random play on.
RDM:ON appears in the display. Tracks will
play in a random order within the previously
selected MCD or DSC ranges.
4 Press b to turn random play off.
RDM:OFF appears in the display. Tracks will
continue to play in order.
Multi-CD Player
En
20
Section
07