Filter
Top Products
1 Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a TPor enhanced
other networks TP station the TP (
) indica-
tor will light.
2 Press TA to turn traffic announcement
standby on.
Press TA and TA ON appears in the display.
The tuner will standby for traffic announce-
ments.
# To turn traffic announcements standby off,
press TA again.
3 Use VOLUME to adjust the TA volume
when a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
# You canalso cancel the announcementby
pressing SOURCE, BAND, a, b, c or dwhile a
traffic announcement isbeing received.
Notes
! You canalso turn on or off TA function in the
menu that appearswith the pressing of
FUNCTION.
! The system switchesback to the original
source following trafficannouncement recep-
tion.
! Only TPand enhanced othernetworks TP sta-
tions are tuned induring seek tuning or BSM
when TA ison.
Using news program
interruption
When a news program is broadcast from a
PTY code news station the unit can switch
from any station to the news broadcast sta-
tion. When the news program ends, reception
of the previous program resumes.
% Press TA and hold to turn on news pro-
gram interruption.
Press TA until NEWS ON appears in the dis-
play.
# To turn off newsprogram interruption, press
TA and hold untilNEWS OFF appears in thedis-
play.
# A news program canbe cancelled by pressing
TA.
# You canalso cancel the news programby
pressing SOURCE, BAND, a, b, c or dwhile a
news program isbeing received.
Note
You canalso turn on or off newsprogram in the
menu that appearswith the pressing of
FUNCTION.
Receiving PTY alarm
broadcasts
PTYalarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the TA volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
! An emergency announcement can be can-
celled by pressing TA.
RDS
En
13
English
Section
05