Pioneer DEH-24UB CD Player User Manual


 
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stationsmemory)
BSM (best stationsmemory) automatically stores
the six strongeststations in theorder of their sig-
nal strength.
1 Press M.C. toturn BSM on.
To cancel,press M.C. again.
LOCAL (localseek tuning)
Local seek tuninglets you tunein to only those
radio stationswith sufficiently strong signalsfor
good reception.
1 Press M.C. toselect the desired setting.
FM: OFFLV1LV2LV3LV4
AM: OFFLV1LV2
The highest levelsetting allows receptionof
only thestrongest stations, while lowerlevels
allow thereception of weaker stations.
SEEK (left/right keysetting)
You can assigna function to theleft and right keys
of the unit.
Select MAN(manual tuning) to tuneup or down
manually or selectPCH (preset channel)to switch
between presetchannels.
1 Press M.C. toselect MAN or PCH.
CD/CD-R/CD-RW and USB
storage devices
Basic operations
Playing aCD/CD-R/CD-RW
1 Insert the disc intothe disc loadingslot with
the labelside up.
Ejecting aCD/CD-R/CD-RW
1 Press h.
Playing songson a USB storagedevice
1 Open the USB portcover.
2 Plug in the USBstorage device usinga USB
cable.
A songwill be played automatically.
Stopping playbackof files ona USB storage de-
vice
1 You maydisconnect the USBstorage device at
any time.
The unitstops playback.
Selecting afolder
1 Press 1/
or 2/ .
Selecting atrack
1 Press c ord.
Fast forwarding or reversing
1 Press and holdc or d.
! When playingcompressed audio, thereis no
sound duringfast forward or reverse.
Returning toroot folder
1 Press and holdBAND/
.
Switching betweencompressed audio and CD-DA
1 Press BAND/
.
Switching betweenplayback memory devices
You can switchbetween playback memory devices
on USBstorage devices with morethan one Mass
Storage Device-compatiblememory device.
1 Press BAND/
.
! You can switchbetween up to 32different
memory devices.
Note
Disconnect USB storage devices from the unit
when not in use.
Displaying text information
Selecting thedesired text information
1 Press
.
! Depending onthe version of iTunesused to
write MP3files to a discor media filetypes, in-
compatible textstored within an audiofile may
be displayedincorrectly.
! Text information itemsthat can bechanged
depend onthe media.
Selecting and playing files/
tracks from the name list
1 Press to switch to the file/track name
list mode.
2 Use M.C. to select the desired file name
(or folder name).
Changing thefile or folder name
1 TurnM.C.
Playing
1 When a file ortrack is selected,press M.C.
Viewing alist of the files(or folders) in the se-
lected folder
1 When a folder isselected, press M.C.
Playing asong in the selectedfolder
1 When a folder isselected, press andhold M.C.
Advanced operations using
special buttons
Selecting arepeat play range
1 Press 6/
to cyclebetween the following:
CD/CD-R/CD-RW
! ALL Repeat all tracks
! ONE Repeat the current track
! FLD Repeat the current folder
USB audioplayer/USB memory
! ALL Repeat all files
! ONE Repeat the current file
! FLD Repeat the current folder
Playing tracksin random order
1 Press 5/
to turn randomplay on oroff.
Tracks ina selected repeat rangeare played in
random order.
! To changesongs during randomplay, press d
to switchto the next track.Pressing c restarts
playback ofthe current track fromthe begin-
ning of thesong.
Pausing playback
1 Press 4/PAUSE topause or resume.
Enhancing compressedaudio and restoring rich
sound (soundretriever)
1 Press 3/S.Rtrv tocycle between:
12OFF (off)
1 is effectivefor low compressionrates, and 2
is effectivefor high compression rates.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Operating this unit
6
Section
Operating this unit
En
02