Filter
Top Products
14
<DRB1333>
En
Loop Playback (*)
7 Defining a loop (MANUAL)
1. Press the PLAY/PAUSE button (6) to begin playback.
2. During replay, press the LOOP IN/REALTIME CUE button
at the loop in point.
÷ Note that this operation need not be performed if a prerecorded Cue point is
to be used as the start of the loop.
3. During playback, press the LOOP OUT button at the point
from which you wish to end the loop.
÷ The AUTO BEAT LOOP 8 (MANUAL 1/1) button indicator lights.
÷ Loop play begins between the loop in-point to loop-out point.
7 Shorten the Loop Length (LOOP CUTTER)
When MANUAL mode is used to create a loop during playback or pause, the
AUTO BEAT LOOP 8 (MANUAL 1/1) button will light.
Press one of the AUTO BEAT LOOP buttons (1, 2, 4 or 8).
÷ When the AUTO BEAT LOOP 1 (MANUAL 1/8) button is pressed, the
button indicator lights and loop play begins between the loop-in point to a
point 1/8 of the full length of the original loop.
÷ When the AUTO BEAT LOOP 2 (MANUAL 1/4) button is pressed, the
button indicator lights, and loop play begins between the loop-in point to a
point 1/4 of the full length of the original loop.
÷ When the AUTO BEAT LOOP 4 (MANUAL 1/2) button is pressed, the
button indicator lights, and loop play begins between the loop-in point to a
point 1/2 of the full length of the original loop.
÷ When the AUTO BEAT LOOP 8 (MANUAL 1/1) button is pressed, the
button indicator lights, and loop play begins between the loop-in point to a
point 1/1 (all) of the length of the original loop.
Scratch Play (*)
By changing from the JOG MODE to VINYL, and pressing and rotating the surface
of the Jog dial you can replay according to the speed and direction of the Jog dial.
1. Press the JOG MODE VINYL button so the button
indicator lights.
÷ The Jog dial’s [Vinyl] indicator also lights.
2. When replaying a CD press the surface of the Jog dial.
÷ Playback slows down and stops (the slowdown in speed until the disc stops
(response characteristics) can be set separately). By rotating the Jog dial
when playback speed is decreasing but not yet stopped all sound will stop
halfway through. See Step 3 for playback when rotating the Jog dial.
3. Turn the Jog dial in the direction and at the speed you
wish to playback the disc.
÷ The CD is played back according to the speed and direction of Jog dial
movement.
4. Take your hand off the surface of the Jog dial.
÷ The CD spins up or down to return to normal playback mode.
(The slowdown or increase in speed until the CD returns to normal play-
back (response characteristics) can be set separately.)
7 This function sets the time to full stop when the Jog
dial’s surface is pressed, and the time from full stop to
normal playback speed when the surface of the Jog dial
is released.
Rotate the VINYL SPEED ADJUST TOUCH/RELEASE dial.
÷ Rotating the dial changes the deceleration speed (response) from playback
to full stop, and the acceleration speed (response) from full stop to normal
playback.
Functions indicated with an asterisk (*) are disabled when
the rear panel DIGITAL OUT MODE switch is set to NORMAL.
÷ When the DJ Mixer’s CROSS FADER slider has moved all the way to the
right side, the sound heard from the speaker will have changed from track
A to track B, and the operation is complete.
7 Long mix play
If the BPM rates match, mixing of tracks A and B will sound good even if the
CROSS FADER slider is in the middle position.
BASIC OPERATION: DJ PLAYER OPERATION
ADVANCED OPERATIONS
Quick Return (*)
When the JOG MODE is set to VINYL, pressing the surface of the Jog dial returns
playback instantly to the cue point.
1. Press the JOG MODE VINYL button so that the button
indicator lights.
÷ The Jog dial’s [Vinyl] indicator also lights.
2. Press the QUICK RETURN button so that the button
indicator lights.
÷ The [QUICK RETURN] indicator will appear in the display, and the Jog
dial display will shown the flashing cue point position indicator.
3. During playback, press the surface of the Jog dial.
÷ If a cue point has been stored in memory, the playback will return instantly
to the stored cue point; if no cue point has been stored in memory, the
playback will not change.
÷ Playback will also return to the in-point (cue point) if the Jog dial is pressed
during loop playback.
Jog dial
How to Brake (*)
÷ When you press the PLAY/PAUSE button (3/8)in the VINYL mode dur-
ing playback, the VINYL SPEED ADJUST TOUCH/RELEASE dial will
cause a corresponding speed and the sound will stop.
÷ Upon pressing the PLAY/PAUSE button (3/8) again playback will com-
mence and the VINYL SPEED ADJUST TOUCH/RELEASE dial will
respond accordingly.
7 Fader start play
Using the cross fader start function of the DJM-600, DJM-500, DJM-300 or DJM-
3000 step 10 above can be eliminated for even simpler mixing. In addition,
when the CROSS FADER slider is returned to its original position, the status
returns to that in step 9 (player CD2 at its Cue point), so that you can repeat the
same play as many times as you like.
How to Spin (*)
During playback in the VINYL mode either press the surface of the Jog dial or press the
PLAY/PAUSE button (6) to cause a pause, then quickly turn the Jog dial, even
when released playback will occur according to the speed and direction of the dial.
JOG MODE VINYLRELOOP/EXIT
AUTO BEAT
LOOP 1,2,4,8
QUICK RETURN
LOOP IN
REALTIME
CUE
LOOP OUT
(OUT ADJUST)
VINYL SPEED ADJUST
TOUCH/RELEASE
CUE
REV
SEARCH
PLAY/PAUSE
1, ¡
6