Filter
Top Products
DJS Ver. 1.500
5
2
Chapter 2
Precautions when Starting Up
Before starting to play with your CDJ-400, computer and DJS, select a player control
and where the audio is output.
2-1
Selecting a Player Control
Connect the CDJ-400 to your computer with a USB cable.
For information on each of the cables that come with the CDJ-400 as well as each type of the
CDJ-400’s cable terminals, please refer to CONNECTIONS in the Operating Instructions of
your CDJ-400.
1
Start up your computer.
2
Connect a USB cable to the USB port on the back of your CDJ-400
and to your computer’s USB port and then turn on your CDJ-400.
• Alternatively, you can also power up your CDJ-400 first and then connect the CDJ-
400 to your computer.
3
Start up DJS.
• Once DJS starts up, the [DJ Play] screen is displayed.
4
Select PC with your CDJ-400’s USB select button (SOURCE
SELECT).
• Each time you press the USB select button, the indicator switches between
MEMORY and PC.
5
Rotate the CDJ-400’s rotary knob (SELECT PUSH) to select the DJS
player (A or B) you wish to assign.
• Assigning a CDJ-400 to DJS Player A
When you turn the Rotary dial to the left, PLAYER A? is shown on the Display of
your CDJ-400; press the Rotary dial to select it.
• Assigning a CDJ-400 to DJS Player B
When you turn the Rotary dial to the right, PLAYER B? is shown on the Display of
your CDJ-400; press the Rotary dial to select it.
When connecting two CDJ-400s
After you assign one of your CDJ-400s to a player (Either A or B), assign the other
CDJ-400 to the other DJS player (A or B).
When connecting one CDJ-400
When PC is selected, if you press the EJECT button (EJECT), the assigned DJS player
switches from A to B (or from B to A).
‘3-3 Switching the Player Control’
Warning!
Before Connecting to your
Computer
If you are going to connect and use a CDJ-400
with your computer, install the driver software
for the CDJ-400 onto your computer.
For information on obtaining the driver software
for your CDJ-400 and how to install it, please
refer to CONNECTIONS of the CDJ-400 as well
as the following web page.
http://www.prodjnet.com/support/en/
Warning!
Starting up DJS
First connect your CDJ-400 and power it up, then
start up DJS.
Removing a CDJ-400
Always close DJS before disconnecting your
CDJ-400 or turning it OFF.
Display
USB select button
(SOURCE SELECT)
EJECT
b
u
tt
on
(EJECT)
Rotary knob
(SELECT PUSH)
Warning!
When three or more CDJ-400s are
connected
Even if you connect three or more CDJ-400s,
you will not be able to use the third or additional
CDJ-400s to operate DJS or to output the DJS
audio.