Filter
Top Products
2004 Jan 28 9
Philips Semiconductors Product specification
22 W BTL or 2 × 11 W
stereo power amplifier
TDA1519C
Notes
1. Output power is measured directly at the output pins of the device.
2. Frequency response externally fixed.
3. Ripple rejection measured at the output with a source impedance of 0 Ω (maximum ripple amplitude of 2 V).
4. Frequency f = 100 Hz.
5. Frequency between 1 and 10 kHz.
6. Frequency between 100 Hz and 10 kHz.
7. Noise voltage measured in a bandwidth of 20 Hz to 20 kHz.
8. Noise output voltage independent of R
S
(V
i
= 0 V).
SVRR supply voltage ripple rejection on; notes 3 and 4 34 −−dB
on; notes 3 and 5 48 −−dB
mute; notes 3 and 6 48 −−dB
standby;
notes 3 and 6
80 −−dB
Z
i
input impedance 25 30 38 kΩ
V
n(o)(rms)
noise output voltage (RMS value) note 7
on; R
S
=0Ω−200 −µV
on; R
S
=10kΩ− 350 700 µV
mute; note 8 − 180 −µV
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT