Philips HK-0947-NP2500-FR Home Theater System User Manual


 
33
Wireless
Wireless
standard
802.11g, backwards compatible to
802.11b
Wireless
security
WEP (64 or 128 bit),
WPA/WPA2 (8-63 characters)
WPS-PBC
WPS-PIN
Frequency
range
2412 - 2462 MHz (CH1-CH11)
(for /79, /37, /55, /97)
2412 - 2472 MHz (CH1-CH13)
(for /12, /05)
Antenna 2x internal, diversity mode
enabled
Wired (LAN / Ethernet)
Wired standard 802.3 / 802.3 u
Speed 10 / 100 MBit/s
Mode half / full duplex
Crossover detection
(Auto MDIX)
Yes (Auto MDIX)
Decoding capabilities
MP3 8 - 320 kbps (CBR / VBR)
WMA 32 - 192 kbps (CBR /
VBR)
AAC (M4A) 16 - 320 kbps (CBR /
VBR)
PCM 1x (1.4 Mbps)
FLAC Supported
Ogg Vorbis Supported
JPEG Supported
Playlist support
*.m3u, *.wpl Supported
iTunes Supported (via by-packed
software)
Picture format support
JPEG Supported
10 Technical data
General
AC Power Voltage information is
printed on the back or
the underside of the
NP2500.
DC Power 5 V / 1 A
Dimensions (w x
h x d)
252.5 x 99 x 34 mm
Weight (net) Main unit: ~ 0.46 kg
Power consumption
On < 5 W
Standby (active) < 4 W
ECO (passive)
standby
< 1 W
Audio output
Line out 2x cinch, 500 mV (output
level can be adjusted), 20
- 20,000 Hz
SPDIF 1x chinch (coax), 0.5 V,
75 Ω
Headphones 1x 3.5 mm jack
30 - 18,000 Hz
16 - 150 Ω
Signal to noise
ratio (line out)
typically 85 dBA (IEC)
Signal to
noise ratio
(headphones)
typically 85 dBA (IEC)
Distortion (line
out / headphones)
< 0.15 %
Audio input
Aux in (line in) 2x cinch
Input sensitivity 500 mV
Input impedance > 10 kΩ
English
EN