Filter
Top Products
12
First-time connection to
home network
After you select [No] to decline to view the
demo, NP2500 prompts you to select your
location / time zone. NP2500 also reminds
you to register NP2500 at www.philips.com/
welcome and to install the PC software.
This is how to navigate and select with the
remote control:
Press •
or to select a menu option.
Press • OK to conrm a selection.
Press • BACK
to go back to the
previous screen.
Press • HOME to go to the Home menu.
1 Select the location / time zone and
conrm.
NP2500 shows the prompt for the »
network connection.
2 Select [Yes], to create a connection to
the network.
NP2500 shows the prompt for the »
network setup (if no network has been
set up yet).
Select » [No] to exit the setup and go
to the Home menu.
3 Continue with one of the following
options:
First-time setup: • Wireless network
connection with automatic IP address
This setup requires the following:
A wireless access point or wireless •
router with broadband Internet
access
Manual entry of your encryption key •
(for encrypted network connections
only)
First-time setup:• Wireless network
connection with static IP address
This setup requires the following:
A wireless access point or wireless •
router with broadband Internet
access
Manual entry of your IP address.•
6 First-time setup
This is how to navigate and select with the
remote control:
Press •
or to select a menu option.
Press • OK to conrm a selection.
Press • BACK
to go back to the
previous screen.
Press • HOME to go to the Home menu.
When you connect NP2500 to the
power supply for the rst time, NP2500
displays the prompt for the language
selection.
1 Select the language and conrm.
NP2500 displays the prompt for the »
optional demo play.
You have two options:
View the demo.•
Complete the rst-time setup.•
Tip
After the rst-time set-up, you can change the •
language in the Settings menu.
View the demo
1
Select “[Yes, show me the demo]”, to
view the demo.
The demo plays continuously until you »
exit the demo play.
2 To exit the demo play, press .
Note
NP2500 remains in rst-time setup status until •
you select [No] to decline the demo play.
You can start the demo play again with the
•
DEMO button on the remote control or in the
Settings menu of NP2500.
EN