Philips FW-V320 Stereo System User Manual


 
18
English
3139 115 20852
Playing the programme
1 Press PLAYÉÅ to start programme playback.
PLAY PROGRAM” will be displayed.
The track number and elapsed playing time of
the current track will appear on the display.
If you press REPEAT during programme
playback, the current track or all programmed
tracks will be played repeatedly.
"REPEAT TRACK", "REPEAT PROGRAM" or
"REPEAT OFF" will be displayed.
The REP and PROG flags appear on the
display.
2 Press Ç to stop programme playback.
Note:
If you press any other DISC DIRECT PLAY
buttons, the system will play the selected disc and
the stored programme will be cleared.
Erasing the programme (when
playback is stopped)
Press Ç.
PROGRAM CLEARED” will be displayed.
Note:
The programme will be erased when the system
is disconnected from the power supply or switched
to standby mode or other sources or when you
change the programme disc.
Repeat (only on remote control)
You can play the current track or a disc
repeatedly.
1 Press REPEAT on the remote control to select
the various repeat modes.
"REPEAT TRACK", "REPEAT DISC"or
"REPEAT OFF" will be displayed.
The REP flag appears on the display.
The current track or disc will now be played
repeatedly until you pressÇ.
2 Press REPEAT until the "REPEAT OFF" mode
is displayed to resume normal playback.
The REP flag disappears from the display.
Notes:
REPEAT DISC mode is not available during
programme play mode.
VIDEO CD
DBB DSC
RESUME
VOCAL
ÅÉ
1
3
2
4
6
5
7
9
8
VOLUME
á
à
IS
ë
í
Ç
0
2
TAPE 1/2
OSD
VCD.CD 1/2/3
AUX
TUNER
REPEATPROG
A-B
ZOOM
KEY CONTROL
SLOW
PBC RETURN
DIGEST
ECHO
-
+
#
Ö
TITLE
-
TITLE
+
ALBUM
-
ALBUM
+
Adjusting the TV System
Before viewing the Video CD, ensure that the set
is switched to corresponding PAL or NTSC
system of your TV set (exception Multi – system
TV).
Press and hold PAL/NTSC for more than 2
seconds to switch between PAL or NTSC TV
system.
After TV system is selected, the set will
automatically switch to the last TV system setting
every time the VCD source is selected.
Note:
Before adjusting the TV system, make sure that
there is no MP3-CD in disc tray 1 during power up.
OSD On Screen Display
If you insert VCD/CD, your TV screen will serve
as an additional display for messages (e.g. PLAY,
STOP), and information stored on the VCD/CD.
Press OSD on the remote control repeatedly to
switch ON or OFF.
When OSD is switched ON; you can see the
following display on the TV screen.
Below is an example of the OSD message.
CD / VCD / MP3-CD
pg 01-32/V320/21-Eng 28/05/2001, 09:02 AM18