27
English
3139 115 20823
Dubbing tapes (from tape deck 1 to tape
deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape deck 2.
2 Load the prerecorded tape into tape deck 1 and
a blank tape into tape deck 2 with full spool to
the left.
3 Press DUBBING.
➜ "DUB" with "2" scrolling right will be displayed.
¶ Dubbing will start immediately.
➜ The REC starts flashing.
4 Press Ç to stop dubbing.
Notes:
– At the end of side A, flip the tapes to side B and
repeat the procedure.
– Dubbing of tapes is only possible from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
– You can switch to other source while dubbing.
Recording from other sources
(only on tape deck 2)
1 Load a blank tape into tape deck 2 with the
open side downward.
2 Press VCD, TUNER or AUX.
¶ Start playback of the selected source.
3 Press RECORD to start recording.
➜ The REC starts flashing.
4 Press Ç to stop recording.
Notes:
– During recording, it is not possible to listen to
another source.
VCD/CD Synchro Start
Recording
1 Load a blank tape into tape deck 2 and a disc
into a disc tray.
2 Press VCD to select VCD/CD mode.
¶ You can programme the tracks in the order you
want them to be recorded (see Programming
Tracks). If not, select the disc by pressing VCD
(CD 1•2•3) and the tracks are recorded
according to the order on the selected disc.
3 Press RECORD to start recording.
➜ The REC flag starts flashing.
¶ Disc will start playback automatically.
4 Press Ç to stop recording.
Recording
MICROPHONE - LEVEL
Karaoke
Microphone Mixing
1 Set the MIC LEVEL control to the minimum
level to prevent acoustic feedback (e.g. a loud
howling sound) before you connect the
microphone.
2 Connect a microphone to the
MICROPHONE socket.
3 Press VCD, TUNER, TAPE or AUX.
4 Play the selected source.
5 Adjust the volume level with VOLUME control.
6 Adjust the MIC LEVEL control to the mixing
level that you want.
7 Start singing or talking through the microphone.
Note:
– Keep the mic away from the speakers to
prevent howling
pg 01-032/V220/21-Eng 28/05/2001, 09:03 AM27