Filter
Top Products
26
English
3139 115 20823
Recording
STANDBY
-
ON
PROGRAM DIM
FULL AUTO STOP
PLAYBACKPLAY/REC
VCD MP3-CD MINI HIFI SYSTEM
CD1 • 2 • 3 BAND
TAPE 1 • 2
STOP•CLEAR
PLAY• PAUSE
D
B
B
VIDEO
O
P
T
I
M
A
L
J
A
Z
Z
R
O
C
K
T
E
C
H
N
O
DSC
RECORD
DUBBING A.REPLAY
VOLUME
CLOCK•TIMER
RETURNPBC
DEMO STOP
▲ OPEN
TAPE 2
TAPE 1
▲ OPEN
PAL/NTSC
SEARCH•TUNING
PREV NEXT
PRESET
▲
▲
MP
3
-
CD
ALBUM
+
TITLE
+
MICROPHONE - LEVEL
TAPEVCD TUNER
AUX
Notes:
– If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
– For recording, use only tape of IEC type I
(normal tape).
– The tape is secured at both ends with leader
tape. At the beginning and end of tape, nothing
will be recorded for six to seven seconds.
– The recording level is set automatically,
regardless of the position of VOLUME, Incredible
Surround or DSC.
– To prevent accidental recording, break out the
tab on the left shoulder of the tape side that you
want to protect.
– If "CHECK TAPE" is displayed, the protection
tab has been broken. Put a piece of clear adhesive
tape over the opening.
Recording the mixed sound /
One Touch Recording
¶ During microphone mixing, you can record the
mixed sound on a tape in tape deck 2 except
dubbing mode.
¶ For One Touch Recording, as soon as you press
RECORD, the current source (VCD, TUNER or
AUX) will be recorded on tape deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
➜ The REC starts flashing.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in TAPE mode,
"SELECT SOURCE" will be displayed. One Touch
Recording is not possible in TAPE mode.
pg 01-032/V220/21-Eng 28/05/2001, 09:03 AM26