25
English
3139 115 20823
Tape Playback
1 Press TAPE (TAPE 1•2) to select TAPE mode.
➜ "TAPE 1" or "TAPE 2" will be displayed and
followed by "T1 222 " or "T2 222".
2 Load the tape into the selected tape deck.
3 Press PLAY ÉÅ to start playback.
➜ "T1" or "T2" with "2" scrolling right will be
displayed.
¶ Press A.REPLAY to select the different type of
playback mode (see Auto Replay)
4 Press Ç to end playback.
➜ "T1" or "T2" with "222" will be displayed.
Rewind/Fast Forward
When playback is stopped
1 You can rewind or fast forward the tape by
pressing à or á respectively.
➜ If rewinding, "T1 1 or T2 1" with “1”
scrolling left will be displayed.
➜ If fast forwarding, "T1 2 or T2 2" with “2”
scrolling right will be displayed.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
2 Press Ç to stop rewinding or fast forwarding.
During playback
¶ Press and hold à or á until the desired
passage is located.
➜ “T1 or T2” with “11 or 22”" scrolling left or
right will be displayed depending on which
button is pressed.
➜ During searching, the sound is reduced to a
low volume.
➜ When you release à or á, the tape
continues playing.
Notes:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (e.g. CD,
TUNER, or AUX).
– Before playing a tape, check and tighten slack
tape with a pencil. Slack tape may get jammed or
may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not recommended for
use in this system.
– Store the tapes at room temperature and do not
put them too close to a magnetic field (for
example, a transformer, TV, or speaker).
Ta p e
Aux
STAND BY
-
ON
PROGRAM DIM
VCD MP3-CD MINI HIFI SYSTEM
CD1 • 2 • 3 BAND
TAPE 1 • 2
TAPEVCD TUNER
STOP•CLEAR
PLAY• PAUSE
D
B
B
VIDEO
O
P
T
I
M
A
L
J
A
Z
Z
R
O
C
K
T
E
C
H
N
O
DSC
RECORD
DUBBING A.REPLAY
VOLUME
CLOCK•TIMER
RETURNPBC
DEMO STOP
PAL/NTSC
SEARCH•TUNING
PREV NEXT
PRESET
▲
▲
MP
3
-
CD
ALBUM
+
TITLE
+
MICROPHONE - LEVEL
AUX
Selecting External Equipment
If you have connected the audio out terminals of
the external equipment (TV, VCR, Laser Disc
player, DVD player or CD Recorder) to the
AUX IN terminals, you can hear the enhanced
sound from the system.
¶ Press AUX to select the external equipment.
➜ "AUX" will be displayed.
Note:
– All the sound control features (e.g. DSC, DBB,
etc.) are available for selection.
pg 01-032/V220/21-Eng 28/05/2001, 09:03 AM25