32
English
DVD Menu Operations
Night mode - turning on/off
PBC
PBC
NIGHT MODE SET TO OFF
Off
Select this when you want to enjoy the surround
sound with its full dynamic range.
On
Select this to level out the volume. High volume
output will be softened and low volume output
will be brought upward to an audible level. This
feature is only available for movies with Dolby
Digital mode.
Test Tone
AUTOAUTO
The system will start testing the speaker from
left speaker to right speaker cyclically until you
exit tone test.
Notes:
–You can press 1 to exit test tone mode at
any time.
– Main volume can be adjusted during tone test
Setting the digital output
Set Digital Output according to your optional
audio equipment connections.
PBC
Off
Select this to deactivate the digital output.
All
Select this if you have connected the digital
output to a piece of optional audio equipment
that has a multichannel decoder.
PCM only
Select this if the external component is capable
of processing digital signal input. After that,
proceed to “Setting the PCM output”.
Setting the PCM output
PBC
PCM 96K
Select this if the optional audio equipment is
capable of processing digital signal input with
sampling rate of 96 kHz. However, if the sound
output is distorted or there is no sound, select
‘48 kHz’.
PCM 48K
Select this if the optional audio equipment is
incapable of processing 96 kHz digital signal
input, then convert to standard signal with
sampling rate of 48 kHz.
Note:
– The PCM OUTPUT can be selected only when
PCM ONLY is selected.
p001-p047-FWD39-21_Eng 3/10/05, 09:0332