Filter
Top Products
29
English
Using the menu bar
You can continue some operations directly via
the menu bar on the TV screen without
interrupting the disc playback. But when you
enter
(SETUP MENU), the playback will
pause.
1
2,
3
4
1 In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of
the TV set screen.
PBC
2 Press the 1 / ¡ / 5 / 4 on the remote
control to navigate in the menu.
➜ Press 1 / ¡ to move through the menu
bar.
➜ Press 4 to enter the selection.
3 Press OK to confirm the selection.
➜ Playback will resume or begin automatically.
To remove the menu
Press SYSTEM MENU or OK.
IMPORTANT!
– Some operations may be different or
restricted according to the disc format.
Refer to the jacket or care of the disc
you are playing.
x Slow Motion
The slow motion speed will display. Press 4
repeatedly to select a reverse or forward
slow motion speed.
To cancel the slow function, press 2;.
ZOOM
Press 4 repeatedly to select an enlarged pic-
ture ratio: 1.5, 2 or 4. You can press 1 /
¡ / 3 / 4 to move within the enlarged
picture on the TV set.
To resume normal playback, repeat the above
step to select ZOOM OFF.
ANGLE
Press 4 to view the same scene from differ-
ent angles if the DVD is recorded with multi-
angles.
STEP
Press 4 repeatedly to play forward the disc
step by step (one frame every step). To cancel
the step function, press 2;.
PBC
PBC
Press 4 to select PBC ON or OFF, and then
playback will stop automatically. (Only for
VCD discs.)
DVD Menu Operations
p001-p047-FWD39-21_Eng 3/10/05, 09:0329