Philips FWD39/ 21 Stereo System User Manual


 
20
English
Preparations
Notes:
The clock will be cancelled when the power cord
is disconnected or if a power failure occurs.
During clock setting, if no button is pressed
within 10 seconds, the system will exit the setting
mode and go back to it’s previous status.
Step 3: Setting the TV set
IMPORTANT!
Make sure you have completed all the
necessary connections. (See Connections
– Connecting TV set)
1 Press DISC (DISC 1•2•3) on the front panel
(or press DISC 1/2/3 on the remote control).
2 Turn on the TV set and set to the correct Video-
In channel. You should see the blue Philips DVD
background screen on the TV set.
You may go to channel 1 on your TV set, then
press the channel down button repeatedly until
you see the Video In channel.
Or, you can use the TV remote control to
select different video modes.
Or, set TV to channel 3 or 4 if you are using
an RF modulator.
Selecting the color system that matches
your TV set
This DVD Mini Hi-Fi System is compatible with
both NTSC and PAL. For the playback of a DVD
disc on this DVD Mini Hi-Fi System, the color
systems of the DVD, TV set and DVD Mini Hi-Fi
System should match.
1 In disc mode, stop playback and press SYSTEM
MENU.
2 Select icon and press 4.
3 Press 1 / ¡ / 5 / 4 keys on the remote
control to toggle through the functions and
select your preferred option.
Move to and press ¡.
Move to “TV System” and press ¡.
AUTO
Select this if the connected TV set is
compatible with both NTSC and PAL (multi
system). The output format will be consistent
with the video signal of the disc.
NTSC
Select this if the connected TV set is NTSC
system. It will change the video signal of a PAL
video disc and output to NTSC system.
PAL
Select this if the connected TV set is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4 Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
4
2,3
1
p001-p047-FWD39-21_Eng 3/10/05, 09:0320