Filter
Top Products
17
English
Controls on the system and
remote control
1 STANDBY ON
– to switch the system on or to standby
mode.
– to use for EASY SET.
2 DIGITAL SOUND CONTROL (DSC)
– to select the desired sound effect :
OPTIMAL, CLASSIC, TECHNO, JAZZ,
ROCK or VOCAL.
3 INCREDIBLE SURROUND
– to switch on or off the surround sound
effect.
4 n
– to connect headphones.
5 REC (RECORD)
– to start recording on tape deck 2.
6 DUB (HIGH SPEED DUBBING
[HSD])
– to dub a tape in normal or fast speed.
7 JOG
– to select the desired equalizer display.
– to select the desired DSC setting. You
must select the DSC feature first.
– to select the desired level of
Incredible Surround Sound. You must
select the Incredible Surround Sound
feature first.
8 PROG (PROGRAM)
– to program CD tracks in CD mode or
preset radio stations in tuner mode.
9 CLOCK/TIMER
– to view the clock, set the clock or set
the timer.
& DOLBY PRO LOGIC (DPL)
– to select Dolby Surround, Dolby Center
Phantom, Dolby 3 Stereo or Stereo
mode.
* A. REV (AUTO REVERSE)
– available in tape deck 2 only.
– to select the desired play modes ( å /
∂ / ∫ ).
( MODE SELECTION
SEARCH à á (TUNING à á)
for CD............ to search backward/
forward.
for TUNER ..... to tune to a lower or
higher radio frequency.
for TAPE ........ to rewind or fast
forward a tape on tape
deck 2 only.
for TV VOL..... to adjust the TV volume
if the remote operates
your TV.
STOP•CLEAR Ç
for CD............ to stop CD playback or
to clear a program.
for TUNER ..... to stop programming.
for TAPE ........ to stop playback or
recording.
DEMO ...........
(on the system only)
to
start or stop
demonstration mode.
PLAY É / PAUSEÅ(SIDE A•B)
for CD............ to start or interrupt
playback.
for TAPE ........ to start playback.
...................... SIDE : When playing in
Tape 2 mode, to change
side.
CONTROLS
PREV í / NEXT ë (PRESET 4 3)
for CD............ to skip to the beginning
of the current, previous,
or next track.
for TUNER ..... to select a preset
station in memory.
) VOLUME
– to adjust the volume.
¡ DYNAMIC BASS BOOST (DBB)
– to select a bass boost level or to
switch off bass boost.
™ OPEN
– to open tape deck 2.
£ TAPE DECK 2
≤ TAPE DECK 1
∞ OPEN
– to open tape deck 1.
§ REPEAT
– to repeat a CD track.
≥ BALANCE L/R
– to balance the sound level of the Front
Left and Right speakers.
• REAR +/-
– to adjust the sound level of the
surround speakers.
ª CENTER +/-
– to adjust the sound level of the center
speaker.
º TEST TONE
– to check the sound level of the Front
Left, Front Right, Center and Surround
speakers.
⁄ MUTE
– to switch off the sound temporarily.
0 DISPLAY
– to view the current setting of the
system.
! CD CAROUSEL TRAY
@ CD DIRECT PLAY (DISC 1 / DISC 2 /
DISC 3)
– to select a CD tray for playback.
# DISC CHANGE
– to change CD(s).
$ OPEN•CLOSE
– to open or close the CD carousel.
% SOURCE : to select the following:
CD / (CD 1•2•3)
– to select CD mode. When CD playback
is stopped, press to select the disc
tray 1, 2 or 3.
TUNER / (FM•AM)
– to select Tuner mode. When in Tuner
mode, press to select the waveband:
FM or AM.
TAPE / (TAPE 1• 2)
– to select Tape mode. When tape
playback is stopped, press to select
either tape deck 1 or 2.
AUX / (CDR)
– to select sound from an external
source (e.g. TV, VCR, Laser Disc player,
DVD player or CD Recorder). When in
Aux mode, press to select either AUX
or CDR.
TV
(only on the remote control)
– to select TV mode.
^ DPL DISPLAY PANEL
– to view the selected Dolby Pro Logic
setting.