Filter
Top Products
17EN
Set RDS clock
You can use time signal broadcast together with
the RDS signal to set the clock of the unit.
1 Tune to a RDS radio station that transmits
time signals.
2 Press and hold MENU.
» [CLK Sync] is displayed.
Note
• The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
Reset to factory setting
1 In DAB/FM mode, press MENU to enter
the menu options.
2 Press / repeatedly until [System]
displays on the display panel.
3 Press to access the system menu.
» [Factory Reset] displays.
4 Press to enter factory reset menu.
» The display panel shows options [Yes]
and [No] under [Factory Reset].
5 Press / to select [Yes].
6 Press to conrm the DAB/FM factory
reset.
8 Play audio via
Bluetooth
With this product, you can stream audio from a
Bluetooth player.
An application Philips DigitalRadio is available
on Apple App Store and Google Play. To fully
enjoy features of this product, download and
install the application to your smart device.
Note
• The application is compatible with iPod touch, iPhone
and iPad with iOS 4.3 or above.
Note
• Philips does not guarantee the compatibility with all
Bluetooth devices.
• Before pairing a device with this system, read its user
manual for Bluetooth compatibility.
• The product can memorize a maximum of 4 paired
devices.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• The operational range between this system and a
Bluetooth device is approximately 10 meters (30 feet).
• Any obstacle between this system and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
Play audio via Bluetooth
1 Press SOURCE repeatedly to select BT
source.
2 On your device, search for Bluetooth
devices. In the device list, select DTB855.
• If a message prompts for the
permission for Bluetooth connection
with DTB855, conrm it.