Filter
Top Products
6 7ENEN
4 Connect
AW2000 to
your home Wi-
Fi network
There are two options for you to set up
connection between AW2000 and your existing
home Wi-Fi network.
• Wired connection
Use an Ethernet cable (not supplied) to
connect AW2000 to your home Wi-Fi router
directly. After successful connection, you can
enjoy wireless streaming to AW2000 through
your home Wi-Fi network.
• Wireless connection
Apply your home Wi-Fi settings to AW2000
from an iOS or Android device. Once
connected successfully, AW2000 will remember
your home Wi-Fi settings. Then you can enjoy
wireless streaming whenever AW2000 is
powered on and connected to your home Wi-
Fi network automatically.
Before connection of AW2000 to you home
Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and
working properly.
b AW2000 is powered on and the
power indicator stays amber steadily.
Option 1: Set up wired
connection
• Connect an Ethernet cable (not supplied)
to:
• the ETHERNET socket on the back of
the unit
• one of the Ethernet ports on your
home Wi-Fi router
LAN4To Modem12V=1A ResetLAN3 LAN2 LAN1
ETHERNET
ETHERNET
3 Prepare
Always follow the instructions in this chapter in
sequence.
Connect to an existing
speaker system
1 Unscrew the speaker connectors.
2 Insert fully the end of a speaker cable with
red mark into the left red (+) connector.
3 Screw the left red (+) connector to secure
the cable.
4 Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
5 Screw the left black (-) connector to
secure the cable.
6 Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
Connect power and switch
on
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
• Risk of electric shock! When you unplug the AC cord,
always pull the plug from the socket. Never pull the
cord.
• Before you connect the AC cord, make sure that you
have completed all the other connections.
• Connect the AC power cord to:
• the AC IN ~ socket on the back of
the unit.
• the wall power socket.
» The unit switches on automatically.
» The power indicator blinks amber, and
after a while turns to solid amber.
• To switch the unit to normal standby
mode, press
.
» The power indicator turns green.
• To switch the unit to Eco power standby
mode, press and hold
.
• To switch the unit on from normal or Eco
power standby mode, press
again.
AC IN ~