Philips AE5250 Radio User Manual


 
9 EN
5 Listen to DAB
radio
Tune to DAB radio
WhenyouentertheDABmodefortherst
time, the radio automatically scans DAB radio
stations. Then station list is retained in memory
so the next time the radio is switched on, the
station scan does not take place.
1
Press DAB/FM repeatedly to select DAB
radio.
»
A bar graph indicates the progress of
the search and the number of stations
found increase as the scan progresses.
A
When scan is completed, the stations are
listed in numerical then alphabetic order.
»
First available station is broadcast.
B
If there is no DAB coverage currently
available
»
[No DAB Station] is displayed.
a
Change the location or adjust antenna.
b
Press SELECT to scan again.
Change DAB station
1
Tune to a DAB station.
2
Use / TUNING to navigate through
available stations.
3
Press SELECT to choose a station.
Number of
Stations found
Progress bar
Scan DAB radio stations
When playing a DAB station, or the current
station is not available, press and hold MENU
for more than two seconds.
»
The radio scans all available DAB radio
stations and broadcasts the current station.
Tip
New stations and services will be added in the DAB
broadcast. To make new DAB stations and services
available on your radio, do scan on a regular base.
Display station information
1
Tune to a DAB radio station.
2
Press SELECT repeatedly to scroll through
the following information (if available):
»
Dynamic label segment (DLS)
»
Signal strength
»
Program type (PTY)
»
Ensemble Name
»
Channel and frequency
»
Signal error rate
»
Bit rate and audio status
»
Time
»
Date