Philips 848390207 Home Theater System User Manual


 
English
EN 33
Play
First time tuning
The rst time when you access ‘RADIO’ mode,
follow the instructions to install the radio
stations.
1 Press RADIO.
’AUTO INSTALL ... PRESS PLAY’ is
displayed.
2 Press u.
All detected radio stations are stored.
Once complete, it tunes to the rst
preset radio station.
To stop auto tuning, press x.
Note
This unit can store up to a maximum of 40 radio
stations.
If auto installation is not activated or less than 5
radio stations are stored, ‘AUTO INSTALL’ will be
displayed again the next time you turn on to radio
mode.
If the FM radio station transmits RDS (Radio Data
System) data, the name of the radio station will be
displayed.
Listen to radio
1 Press RADIO.
2 Use the remote control to control the
radio.
Button Action
Select a preset radio station.
m M
Tune the radio frequency
backward/ forward.
Press and hold this button to
delete the preset station from
the preset list.
The preset number for
other radio stations
remain unchanged.
Reinstall all the radio stations
1 Press RADIO.
2 Press and hold PROGRAM until ‘START’ is
displayed.
All previously stored radio stations will
be replaced.
Note
If no stereo signal is detected or less than 5 stations
are detected during radio installation, ‘CHECK
ANTENNA’ is displayed.
1_fts6000_12_eng3_final.indd 331_fts6000_12_eng3_final.indd 33 2008-09-03 11:55:09 AM2008-09-03 11:55:09 AM