Filter
Top Products
Im
p
o
r
tant Sa
f
et
y
Instructions
The lightning flash with arrowhead symbol, within an equilateral triangle i
s
intended to alert the user to the presence of uninsulated “dangerou
s
voltage” within the product’s enclosure that may be of sufficien
t
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(
servicin
g)
instructions in the literature accom
p
an
y
in
g
the a
pp
liance.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean onl
y
with a dr
y
cloth.
The asterisk within an equilateral triangle is intended to inform the user t
o
necessary installation or removal instructions regarding equipment o
r
hardware use relatin
g
to the s
y
stem.
7. Do not block any ventilation openings. Ins
t
all in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped
14. To completely disconnect AC power from this apparatus, the power supply cord must be unplugged.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on this
apparatus.
16. The AC plug of the power supply cord shall remain readily operable.
Caution: Do not exceed the marked rating of the AC Output.
Example: If each additional unit is rated 3A, a maximum of 3 units can be connected for a total of 9A.
Management of WEEE (waste electrical and electronic equipment) (applicable in Member States of the European Union and other
European countries with individual national policies on the management of WEEE) The symbol on the product or on its packaging
indicates that this product may not be treated as regular household waste, but has to be disposed through returning it at a Telex
dealer.
Important Service Instructions
C
A
UTION: These servicing instructions are
f
or use by qualified personnel onl
y
.
T
oreducetherisk o
f
electric shock, do not
perform any servicing other than that contained in the Operating Instructions unless you are qualified to do so. Refer all
servicing to qualified service personnel.
1. Security regulations as stated in the EN 60065 (VDE 0860 / IEC 65) and the CSA E65 - 94 have to be obeyed when servicing the appliance.
2. Use of a AC separator transformer is mandatory during maintenance while the appliance is opened, needs to be operated and is
connected to the AC.
3. Switch off the power before retrofitting any extensions, changing the AC voltage or the output voltage.
4. The minimum distance between parts carrying AC voltage and any accessible metal piece (metal enclosure), respectively between
the AC poles has to be 3 mm
and needs to be minded at all times.
The minimum distance between parts carrying AC voltage and any switches or breakers that are not connected to the AC (secondary
parts) has to be 6 mm
and needs to be minded at all times.
5. Replacing special components that are marked in the circuit diagram using the security symbol (Note) is only permissible when using original
parts.
6. Altering the circuitry without prior consent or advice is not legitimate.
7. Any work security regulations that are applicable at the location where the appliance is being serviced have to be strictly obeyed. This applies
also to any regulations about the work place itself.
8. All instructions concerning the handling of MOS
- circuits have to be observed.
Note: SAFET
Y
COMPONENT
(
HAS T
O
B
E
REPLACED WIT
H
ORIGINAL P
A
R
T ON
L
Y
)
1 ELECTRO-VOICE
®
ZxA5 Owne
r
’
s Manual