Filter
Top Products
4 C2900M-QS (9/02)
STEP 1A
CONNECTING THE TRANSMITTER – NET104A
1. Plug in cameras or other video sources with composite NTSC or PAL output.
2. Set DIP switches to position 75 OHM ON (down) to terminate the inputs when the video signal
is not connected to additional video equipment through a T-connection.
3. Connect additional items such as alarms, audio, etc.
4. Connect to the Ethernet network using a standard UTP Cat5 cable with RJ-45 connectors.
5. Insert the power cable plug into the power jack until it latches. Insert the power supply into the
wall socket.