Filter
Top Products
6
Q
™
215FX SPECIFICATIONS
All specifications are typical unless otherwise noted.
0 dBV = l volt
All specifications are referenced to nominal output level (0 dBV)
unless otherwise stated.
All measurements are wideband 20 Hz to 20 kHz unless
otherwise stated.
NOTE: All specs measured at 1 V RMS input and unbalanced
output.
All sliders at mid position, all switches out unless otherwise
noted.
Frequency Response:
±1 dB 20 Hz to 20 kHz
Distortion:
.005% 20 Hz to 20 kHz
Input Impedance:
Balanced 20 k ohms (equal impedances to
ground)
Output Impedance:
330 ohms
Maximum Input Level:
+18 dBV (8 V RMS)
Maximum Output Level:
+18 dBV (8 V RMS)
Nominal Input Level:
0 dBV (1 V RMS)
Nominal Output Level:
0 dBV (1 V RMS)
Input Headroom:
Nominal 18 dB
Output Headroom:
18 dB
Output Noise:
EQ in bypass: -100 dBV
EQ in. all flat: -98 dBV
Filter Frequencies:
25 Hz, 40 Hz, 63 Hz, 100 Hz, 160 Hz, 250 Hz,
400 Hz, 630 Hz, l kHz, 1.6 kHz, 2.5 kHz, 4 kHz,
6.3 kHz, 10 kHz, and 16 kHz
Filter Q:
2.3
Maximum Boost and Cut Filter:
+12 dB, -18 dB
Maximum Boost and Cut Gain: (Wideband Gain)
±15 dB
Low Cut Filter:
40 Hz
Power Consumption:
Domestic: 120 V AC, 60 Hz, 20 watts
Export: 220/230-240 V AC, 50/60 Hz, 20 watts
Dimensions and Weight:
3.5" H x 19" W x 11.375" D
10.1 lbs.
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
TM
®
U.S. Patent pending for circuit providing visual indication of feedback.