Filter
Top Products
5
REAR PANEL FEATURES
LINE CORD-120V PRODUCTS ONLY (10)
We have incorporated a 2-wire line (mains) cable for power on the Q231 FX.
Power requirements:
Domestic: 120 V AC / 60 Hz / 20 W.
Export: 230 V AC / 50/60 Hz / 20 W.
NOTE: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
NOTE: FOR UK ONLY
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows: (1) The wire which is colored green and yellow
must be connected to the terminal which is marked by the letter E or by the earth symbol or colored green or
green and yellow. (2) The wire which is colored blue must be connected to the terminal which is marked with
the letter N or the color black. (3) The wire which is colored brown must be connected to the terminal which
is marked with the letter L or color red.
1/4" OUTPUTS (11)
Two 1/4" Tip-Ring-Sleeve (stereo) jacks (one per channel) provide balanced outputs when
used with stereo (TRS) 1/4" plugs and 2-conductor shielded cables. When used with a mono
1/4" phone plug, the outputs are unbalanced. The Tip is in phase (+) and the Ring is out of
phase (-). Balanced operation of output will allow a 6 dB increase in output level.
XLR OUTPUTS (12)
This XLR jack provides an electronically balanced output that is electrically the same as the 1/4" TRS output
(11). Using this balanced output will provide a 6 dB increase from unbalanced operation.
1/4" INPUTS (13)
Two 1/4" Tip-Ring-Sleeve (stereo) jacks (one per channel) provide balanced inputs when used with stereo
(TRS) 1/4" plugs and 2-conductor shielded cables. When used with a mono 1/4" phone plug, the inputs are
unbalanced. The Tip is in phase ( + ) and the Ring is out of phase ( - ).
XLR INPUTS (14)
This XLR jack providees a balanced input that is elecrically the same as the 1/4" TRS input (13).
Back Panel:
10
11 12 1413 11 12 1413