Filter
Top Products
Congratulations on purchasing a Peavey JSX guitar amplifier. The
JSX is a guitar player’s dream come true, an amp that delivers
superior sound quality and high performance for any style of
guitar playing. Only the finest materials are used to create this
great-sounding, rugged, tour-worthy and very unique-looking tone
machine. I hope you like this amp as much as I do!
ENGLISH
F R O N T PA N E L
(1) POWER SWITCH
This two-way toggle switch applies mains power to the unit. The red POWER STATUS LAMP (3) will
illuminate when this switch is in the ON position.
(2) STANDBY SWITCH
This two-way toggle switch allows the amp to be placed in STANDBY mode. In the STANDBY position
the tubes stay hot but the amplifier is not operational. Switching to the ON position places the amp in
active mode.
(3) POWER STATUS LAMP
This indicator illuminates when mains power is being supplied to the amp.
(4) PRESENCE
Used to fine-tune the high frequency range of the speaker enclosure by varying the damping factor of
the amplifier at high frequencies.
(5) RESONANCE
Used to fine-tune the low frequency range of the speaker enclosure by varying the damping factor of
the amplifier at low frequencies.
(6) MASTER VOLUME
This control sets the overall volume level of the amp. Once the desired balance between the three
channels in the amplifier has been achieved, the entire output level of the unit can be increased or
decreased by rotating this control. Clockwise rotation increases level; counterclockwise rotation
decreases level.
(7) TREBLE
This control, on both the Ultra and Crunch channels, varies the high frequency response of the
amplifier. It is an active control (shelving type) and allows
˜
12 dB of boost or cut.
(8) MID
This control, on both the Ultra and Crunch channels, varies the mid frequency response of the amplifier.
It is an active control (peak/notch type) and allows
˜
12 dB of boost or cut.
Features
• Three 12AX7 preamp tubes
• Four EL34 power amp tubes driven by a 12AX7
• Power amp convertible to use four 6L6GC tubes
• Footswitchable effects loop with independent send and return controls
• Resonance and presence damping controls
• Fully adjustable noise gate circuitry on Ultra and Crunch channels
• Line out with level control
• Cabinet impedance switch (4, 8 or 16 Ohms)
• Heavy duty power, standby and channel select toggle switches
• Classic power status indicator lamp
• Chrome-plated brass control knobs
1
3 5 7 9
11
13
152
4
6 8 10
14
16 10
12
19
20
17
18
Joe Satriani
™
5